Ive already found outer threads about this issue with b7s and 8p a3s but haven't yet found a definitive answer.
So when retrofitting my rnse i found i forgot to order a adapter for the radio antenna/ariel. My original HU was a symphony 2 so had a look on ebay and there were loads that didn't cater for adapting the seperate single fakra and iso connectors(for symphony) into the double fakra (rnse).
Im getting that really the annoying thing where the radio will only let me pick up national stations, radio 1,2 etc and greys out almost every other station preventing me from selecting them.
A bit of research on the interwebs point towards incorrect antenna diversity setup. My avant has no sharkfin but 2 aerials in both rear 1/4 glass.
My original symphony 2 fakra and iso connectors
Rnse double fakra connectors
The kufatec adapter i bought that accommodates all connectors
Looking at what i believe to be the diversity module behind the n/s/r 1/4 trim, there looks to be a couple of empty connectors. I was wondering if it would be a case or adding an extra wire between the module and the rnse?
My knowledge is very limited on this topic so any help is much appreciated.
Cherrs Alex
So when retrofitting my rnse i found i forgot to order a adapter for the radio antenna/ariel. My original HU was a symphony 2 so had a look on ebay and there were loads that didn't cater for adapting the seperate single fakra and iso connectors(for symphony) into the double fakra (rnse).
Im getting that really the annoying thing where the radio will only let me pick up national stations, radio 1,2 etc and greys out almost every other station preventing me from selecting them.
A bit of research on the interwebs point towards incorrect antenna diversity setup. My avant has no sharkfin but 2 aerials in both rear 1/4 glass.
My original symphony 2 fakra and iso connectors
Rnse double fakra connectors
The kufatec adapter i bought that accommodates all connectors
Looking at what i believe to be the diversity module behind the n/s/r 1/4 trim, there looks to be a couple of empty connectors. I was wondering if it would be a case or adding an extra wire between the module and the rnse?
My knowledge is very limited on this topic so any help is much appreciated.
Cherrs Alex