Audidave69 where are all the connections points for the additional wiring for rear view camera on the A5 ?
Audidave69 where are all the connections points for the additional wiring for rear view camera on the A5 ?
I think all my neighbours think I’m mad “why do you keep talking your new car apart”
So do you still have a different rear view camera for 360 then?
They say under bench seat, nothing about side connections.You may be able to pick the can high/low up from a nearer source but I think under the rear bench seat is it’s oficial connection point for rear camera.
I have can wires in the left boot pocket that are factory fitted ready for towbar bar, I have used this for my Towbar but not sure if they can be used for camera even when they go back to the same control unit under rear bench seat connecting to diferent pins though.
I would be interested to know where kufatec say you should connect to.
Is it a plug in to mmi or connection to cams high and low,Sorry to hijack this one but I've posted in the retrofits section... I've got a 2017 A4 2.0 TDi and planning to do the rear view camera, I've read that the wiring differs depending on petrol/diesel... just wondering if it'll be similar to the A5 and if anyone has any wiring instructions they can share?
I've ordered a genuine OEM rear view camera from ebay and the Kufatec wiring loom, but struggling to find any wiring guides.
Thanks in advance for any help.
Sent from my SM-N960F using Tapatalk
Thanks for the reply. I believe it's the connections to cams high and low then a plug into the back of the mmi in the glove box. I have attached what I've ordered, but I'm starting to think the camera might be incorrect as the kufatec one has an integrated lead with connections?Is it a plug in to mmi or connection to cams high and low,
Mine was cams which are under the back seats then though to mmi and find right wires to connect to.
I've ended up paying for access to erwin and managed to download all the docs for my car so I'm now more confident on the wiring... now just trying to find the correct rear camera, you dont happen to know what the part number is for the A4 b9 saloon?The instructions as pin position are correct not necessary the cable colour. I ended up paying for an auto electrician To fit it. Did job in less then 2 hours including putting car back together
Sorry bought the whole kit off . kufatec web site.I've ended up paying for access to erwin and managed to download all the docs for my car so I'm now more confident on the wiring... now just trying to find the correct rear camera, you dont happen to know what the part number is for the A4 b9 saloon?
Sent from my SM-N960F using Tapatalk
Brilliant, thanks so much@Mark Whitby - Here you go, PR-KA2 is the reversing camera, PR-KA6 is the 360 Environment Camera
View attachment 176327
Thanks, after ready the wiring diagrams again that makes sense now.Hi you need to attach to these wires not remove, your need to put the pins back in then attach to these wire as they are cams high and low.
I paid for someone to fit it, its only as I was talking to him at the time that I saw the connections being made for the middle of the car.Can I ask what adaptations changes did you make in 5f.
And as above yes you need to splice the wires you removed onto the wires you now added.
These are the 5F AdaptationsCan I ask what adaptations changes did you make in 5f.
And as above yes you need to splice the wires you removed onto the wires you now added.
Not to derail the thread…but thought I could this answered without making a new one but does anyone know if there’s a similar retrofit for keyless entry? This would be for a B9 S5 Sportback, got in December and I'm in love but my old 2016 Merc had some nice quality of life "toys", only 1 I really miss is the not having to dig in my pockets for my keys.
Cheers!
Supply and fit would be twice the price at Hazzydayz however there are a few sponsors of AS that do this. I think @DJAlix does and cheaper..Cheers mate - any idea how easy it is to fit? Could always buy one and see if there's anyone in Glasgow that can fit it.
Not if you get a camera already coded for your vehicle... I brought one from an Ebay seller who sent it pre coded, so I just need to wire up, and make the two adaptionsDo u have to calibrate the camera after the installation and software dongle flash?
https://www.audizine.com/forum/showthread.php/507970-Backup-Camera-Calibration
connections are the same.It’s for A5 and A4 by Kufatec but it’s pictures from a A4 but it’s different to my layout. Need some wiring diagrams really.