Noob with VCDS, er, whats it telling me?!?

[Pee Jam]

Hi all

Ok, I have recently brought a VCDS package from Ross Tech but am a bit lost as to what this bit is actually telling me!

There is a fault in this module, but there are 4 subsystems, are they all within the one module? And which part has the fault?

Looking at the coding it appears correct for my car, 0001002, an A6 Avant UK, but there are a few more coding options relating to the options on my car, ambient lighting, rear sensors, rain sensor, mulitfunction steering wheel etc, where should those additional coding numbers appear?

How would a seasoned pro with VCDS approach this problem?

Thanks
Peter

Address 07: Control Head Labels: 4F0-910-7xx-07-H.clb
Part No SW: 4F0 910 732 S HW: 4E0 035 729
Component: Interfacebox H43 5150
Revision: 00000000 Serial number: 350I 077819665
Coding: 0001002
Shop #: WSC 02335 758 00200
VCID: 33331CA2D73765AFBC6-8066

Subsystem 1 - Part No: 4F0 910 609 E
Component: Bedienteil MMIC6H02 0060

Subsystem 2 - Serial number: 00000000429092

Subsystem 3 - Serial number: 0130.05.060000000100010366ÿ

Subsystem 4 - Serial number: 010366ÿ

1 Fault Found:
00003 - Control Module
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 5
Fault Frequency: 1
Reset counter: 233
Mileage: 300469 km
Time Indication: 0
Date: 2018.05.03
Time: 20:37:35

 

[RJ-8V]

Something in 07 is not coded correctly. Thats the problem

A3 8V Facelift Limousine

 

[ch1z64]

Hi all

Ok, I have recently brought a VCDS package from Ross Tech but am a bit lost as to what this bit is actually telling me!

There is a fault in this module, but there are 4 subsystems, are they all within the one module? And which part has the fault?

Looking at the coding it appears correct for my car, 0001002, an A6 Avant UK, but there are a few more coding options relating to the options on my car, ambient lighting, rear sensors, rain sensor, mulitfunction steering wheel etc, where should those additional coding numbers appear?

How would a seasoned pro with VCDS approach this problem?

Thanks
Peter

Address 07: Control Head Labels: 4F0-910-7xx-07-H.clb
Part No SW: 4F0 910 732 S HW: 4E0 035 729
Component: Interfacebox H43 5150
Revision: 00000000 Serial number: 350I 077819665
Coding: 0001002
Shop #: WSC 02335 758 00200
VCID: 33331CA2D73765AFBC6-8066

Subsystem 1 - Part No: 4F0 910 609 E
Component: Bedienteil MMIC6H02 0060

Subsystem 2 - Serial number: 00000000429092

Subsystem 3 - Serial number: 0130.05.060000000100010366ÿ

Subsystem 4 - Serial number: 010366ÿ

1 Fault Found:
00003 - Control Module
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 5
Fault Frequency: 1
Reset counter: 233
Mileage: 300469 km
Time Indication: 0
Date: 2018.05.03
Time: 20:37:35

If your cable is 100% genuine then register at ross-tech.com and then you can use the forum and find heaps off tutorials plus answers to your problems . Just a thought