Sportback Audi RS3 FL 500HP+ project
- Thread starter Kristijan Sabljar
- Start date
New update, 9 celzius , 98ron fuel
7.33 sec 100-200kmh
I believe one of fastest stg1 on market on 98 ron
Finally manage to install WAGNER Competiton EVO 3 IC . It fits perfectly. Worse things is to remove bumper(find all screws). Removing stock ic, crash bar and temperature sensor. Than just screw Wagner and return bumper. Also stock bumper is modified and remove plastic behind licence plate .
STOCK
WAGNER EVO 3 VS STOCK IC
WAGNER inside
I did vbox , IAT and Insoric
It was 17 celzius 98 mode
On stg1 i was getting 475-480Hp/580Nm and 7.9 100-200kmh
On stg1+ with just REVO intake i have meassured 485-488Hp/590nm so arround 10hp gain with just bolt on not tuned for it
On stg1+ with Revo intake and WAGENR we measured crazy 498Hp/608Nm!!!!!! 10-15hp gain with just IC bolt on
So without tuning fitting IC and Intake on my car i got 20-25Hp/30Nm!!!!!! and 7.5 sec 100-200kmh versus 7.9 on stg 1
ON STOCK IC on 17 celzius ambient, during pull 80-250kmh IAT goes from 38 celzius - 50 celzius
WAGNER EVO 3 on 17 celzius ambient, during pull 80-250kmh IAT goes from 24 celzius - 32 celzius !!!!!!!!!!
Car feels alive, consistent and IC works perfectly.
HERE are graphs
Revo 1+ , dp, intake VS Revo 1+ dp, intake , WAGNER
HERE is graph stg1 VS ALL parts i have now
Numbers from last night
Next stop DSG map and proper STG2
Stay tuned
STOCK
WAGNER EVO 3 VS STOCK IC
WAGNER inside
I did vbox , IAT and Insoric
It was 17 celzius 98 mode
On stg1 i was getting 475-480Hp/580Nm and 7.9 100-200kmh
On stg1+ with just REVO intake i have meassured 485-488Hp/590nm so arround 10hp gain with just bolt on not tuned for it
On stg1+ with Revo intake and WAGENR we measured crazy 498Hp/608Nm!!!!!! 10-15hp gain with just IC bolt on
So without tuning fitting IC and Intake on my car i got 20-25Hp/30Nm!!!!!! and 7.5 sec 100-200kmh versus 7.9 on stg 1
ON STOCK IC on 17 celzius ambient, during pull 80-250kmh IAT goes from 38 celzius - 50 celzius
WAGNER EVO 3 on 17 celzius ambient, during pull 80-250kmh IAT goes from 24 celzius - 32 celzius !!!!!!!!!!
Car feels alive, consistent and IC works perfectly.
HERE are graphs
Revo 1+ , dp, intake VS Revo 1+ dp, intake , WAGNER
HERE is graph stg1 VS ALL parts i have now
Numbers from last night
Next stop DSG map and proper STG2
Stay tuned
Sam_Rob
Registered User
Toshers
Registered User
Is it just me thinking that either APR or Revo don't want to be the first to release the stage 2 map and publish their figures? 
How long does development from stg1 to stg2 really take?
How long does development from stg1 to stg2 really take?
Is it just me thinking that either APR or Revo don't want to be the first to release the stage 2 map and publish their figures?
How long does development from stg1 to stg2 really take?
Dont know , depends how good software u want. Revo took 1 year for stg1 and now we have fastest stg1 cars
Never seen stg1 doing 7.3 100-200kmh
Without IC and intake best was 7.6 again one of fastest on stg1
I am waiting for the arrival of the carbon intake kit.
I downloaded assembly instructions.
point 13 says :
"Fit the Revo carbon intake pipe and position so that the silicones at either end fit tightly against both the airbox and turbo inlet. Once you are happy with the positioning, tighten all (4) hose clamps to 3Nm "
ONLY 3Nm ?
Is it actually like this? I will have to buy a bicycle torque wrench.
I downloaded assembly instructions.
point 13 says :
"Fit the Revo carbon intake pipe and position so that the silicones at either end fit tightly against both the airbox and turbo inlet. Once you are happy with the positioning, tighten all (4) hose clamps to 3Nm "
ONLY 3Nm ?
Is it actually like this? I will have to buy a bicycle torque wrench.
- Joined
- Aug 8, 2016
- Messages
- 608
- Reaction score
- 299
- Points
- 63
For heavens sake! 3Nm is engineering for finger tight. Nothing to with fragility of the CF tube - silicone rubber forms a natural seal against CF. The clips are in reality there for surety. Unlikely you will be able to twist more than 3Nm from a hand screwdriver.
By stipulating the figure, Revo are countering these numbskulls who tighten hose clamps so much that the rubber is cut.
Stg 2 in the car along with DSG map. Still development soon more numbers , but it will be crazy
illingworth22
Registered User
Great thread from start to finish.... oh except a bit of whinging in the middle. I sent you a PM regarding the Stage 1 map for folks who have only got access to 95 RON petrol.
- Joined
- Apr 25, 2016
- Messages
- 3,321
- Reaction score
- 3,180
- Points
- 113
Hi Kristijan, is Revo stage 2 still not available and are you currently running the beta file? If so, what are your thoughts so far?
They told me originally that it would be September but 2019 is rapidly approaching!
They told me originally that it would be September but 2019 is rapidly approaching!
I notice on dyno charts of tuned cars, Revo and others, that power and torque is slightly down on stock until about 2500 rpm ( I guess when the turbo starts wind up). Is that noticeable under normal driving conditions, does it feel a little lazier of the line.?
- Joined
- Apr 25, 2016
- Messages
- 3,321
- Reaction score
- 3,180
- Points
- 113
I have Revo. I think the standard car is a bit laggy low down and it's similar with the tune. But obviously when the boost does come in, it is quite a bit harder.
Yes car has stock big turbo (odnt forget 510-550Hp potential it has to be big) thats why laggy until 4000 but after revs like crazy especially tuned
Stage 2 should be ready in month or two , allready in few cars
In october i did trip Croatia Malta with my RS3 4300km (2700miles) car was perffeto.
I raced my friend with his RS3 stage 1
Pic from drag race
I raced my friend with his RS3 stage 1
Pic from drag race
Yes car has stock big turbo (odnt forget 510-550Hp potential it has to be big) thats why laggy until 4000 but after revs like crazy especially tuned
Stage 2 should be ready in month or two , allready in few cars
If you think this car is laggy stock you should try an amg a45
My question was more to do with difference in power and torque below 4K. Many of the dyno graphs I’ve seen for tuned cars show tuned torque/power curves slightly down on stock up to 2.5-3k. I notice the same in my a45. On the road you’d notice that it wasn’t quite as sharp just in that initial jump of the lights.
Some have suggested that getting a pedal box will sharpen it up of the mark but I’m not a fan of pedal boxes.
I’m planning to get a Revo tune after my first service in Feb so just doing my research in the meantime.
If you think this car is laggy stock you should try an amg a45
My question was more to do with difference in power and torque below 4K. Many of the dyno graphs I’ve seen for tuned cars show tuned torque/power curves slightly down on stock up to 2.5-3k. I notice the same in my a45. On the road you’d notice that it wasn’t quite as sharp just in that initial jump of the lights.
Some have suggested that getting a pedal box will sharpen it up of the mark but I’m not a fan of pedal boxes.
I’m planning to get a Revo tune after my first service in Feb so just doing my research in the meantime.
It's not like that I had hybrid on my mk7 R RS3 is much better just u feel it's big turbo and needs revs
Cold air, 8 celzius Got me Fastest stg1 CaR on 100 fuel. I have Wagner Intercooler, dp , IE intake
100-200 Kmh (62-125mph) 7.1sec
7.2 consistet
502hp/630nm
Soon stage 2 update and 6.xxx
100-200 Kmh (62-125mph) 7.1sec
7.2 consistet
502hp/630nm
Soon stage 2 update and 6.xxx
Something new
Stock discs cracked after 10000 mile so i went for upgrade
380mm Revo (Alcon) brakes. Looks amazing , i really love color and its weight saving.
Stock Discs 13,2KG
Stock caliper 6,4 KG
Revo 380mm 10.4 KG
Revo caliper 3.34 KG
Piece of sh....
Ultra happy , braking is superb .
Now i will paint rear ones i put Castrol SRF braking oil
Also instaled IE carbon intake(got super cheap price for demo tests)
Thanks to FRESH mods UK for fast delivery and awesome feedback for black badges
Final numbers on 7 celzius
0-60mph 3.0 sec
0-100mph 6.6 sec
62-125mph 7.1 sec
60-130Mph 8,3 sec
1/4 10.9 sec with 1.86 60 FT need better tires now when its cold
Now only i wait Revo stage 2 and we go deeeep
Stock discs cracked after 10000 mile so i went for upgrade
380mm Revo (Alcon) brakes. Looks amazing , i really love color and its weight saving.
Stock Discs 13,2KG
Stock caliper 6,4 KG
Revo 380mm 10.4 KG
Revo caliper 3.34 KG
Piece of sh....
Ultra happy , braking is superb .
Now i will paint rear ones i put Castrol SRF braking oil
Also instaled IE carbon intake(got super cheap price for demo tests)
Thanks to FRESH mods UK for fast delivery and awesome feedback for black badges
Final numbers on 7 celzius
0-60mph 3.0 sec
0-100mph 6.6 sec
62-125mph 7.1 sec
60-130Mph 8,3 sec
1/4 10.9 sec with 1.86 60 FT need better tires now when its cold
Now only i wait Revo stage 2 and we go deeeep
Stg 2 in the car along with DSG map. Still development soon more numbers , but it will be crazy
Says there stage 2 in the car?
Any idea on release date for stage 2 and dsg?
