20mm spacers up front and lowered 30mm on standard avus rims ?

[mattyboy199]

Pretty much as the title.

Should I expect any issues ? Bolt throughs just seem like a long way round to the same place for 5mm. Won't 20mm work ?

New bolts
New locking bolts or nuts
More difficult to get wheels on and aligned with holes

 

[DPM]

Are you wanting 20mm front and rear?

Damian @ DPM Performance

 

[mattyboy199]

I'm considering running 20mm front and possibly 25mm rear. Or alternatively running 15mm front and 20mm rear. Just after some feedback from anyone that has done 20mm front.

I already have 20mm bolt ons.

 

[jojo]

I'm considering running 20mm front and possibly 25mm rear. Or alternatively running 15mm front and 20mm rear. Just after some feedback from anyone that has done 20mm front.

I already have 20mm bolt ons.

15mmF and 20mmR is the usual amount of spacing I would recommend for factory alloys on the S3.

 

[jojo]

15mmF and 20mmR is the usual amount of spacing I would recommend for factory alloys on the S3.

It will look like this.

 

[1wheelonly]

Just upgraded my lads to the 18” alloys and played with spacers

We originally wanted 25mm rear 20mm front
But after fitting the 18” alloys they are about 5mm wider than the 17” avus and 20mm was too much up front
Settled for 20mm tears and 15mm fronts

Sent from my iPhone using Tapatalk

 

[mattyboy199]

I went 20mm front and 25mm rear. All good.