The only thing I can think of is that there's a region specific part to it? That's a different message than I get on my car if it decides it can't read a traffic sign (which has it from factory), so maybe it's looking for a US style sign or something? Just a thought and I've done no coding so don't know if that's even an option within it...
Happy Grumpz
Registered User
- Joined
- Jun 2, 2016
- Messages
- 568
- Reaction score
- 710
- Points
- 93
- Location
- Tyne & Wear
- Website
- www.mahalkitaphotography.com
You’s have been for a drive right? That appears on mine until the camera either detects a sign or the speed limit from the maps takes over.
Does it require navigation plus as Kufatec seem to imply?
Please note: Only Suitable for models with PR-QK1 Driver Assist Camera and Colour DIS.
- only for vehicles with PR-No .: QK1 and 9S7, 9S8
- For vehicles with PR No .: 9S5 no display in FIS possible
- for vehicles without navigation plus (PR no .: 7UG) only limited operation possible. Due to the lack of Navidaten be partially z. B. no place signs and tempo zones recognized
Please note: Only Suitable for models with PR-QK1 Driver Assist Camera and Colour DIS.
Is there anyway to disable no sim card warning on starting maps.
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
Hi,
I have followed all the active lane assist instructions and i get a fault with audi pre sense when i select
And audi pre sense fault when i turn the ignition on.
I have followed the steps multiple times but still get the errors.
The mmi has been reset and active lane assist is shown in mmi but is greyed out.
I have a fault code C10ACF2 in steering
And fault code U101400 control module incorrectly coded
Any ideas or help appreciated.
I have followed all the active lane assist instructions and i get a fault with audi pre sense when i select
- Set Heading Control Config to 'heading_control
And audi pre sense fault when i turn the ignition on.
I have followed the steps multiple times but still get the errors.
The mmi has been reset and active lane assist is shown in mmi but is greyed out.
I have a fault code C10ACF2 in steering
And fault code U101400 control module incorrectly coded
Any ideas or help appreciated.
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
I downloaded the OBDEleven app and it suggests that video in motion isn't possible on newer software is this true?
I would like the following options,
Video in motion
Longer hands free
Longer traffic jam assist before it asks to reset again
My car is a December 2017 model A4
I would like the following options,
Video in motion
Longer hands free
Longer traffic jam assist before it asks to reset again
My car is a December 2017 model A4
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
Hi,
Does anyone know if its possible in VCDS to always have the rear LEDs on along with the front DRLs as standard?
Does anyone know if its possible in VCDS to always have the rear LEDs on along with the front DRLs as standard?
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
Yes is possible
Original VCDS Hex-net | VCP | Odis-S | Odis-E | A3 8V Facelift Limousine
Thanks. Will the VCDS coding below work for the B9 (got it from B8 forum):
Tailights active as DRL's
[09 Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 2: Bit 7 - (1 = active)
LEDs remain at full brightness with parking lights
[09 Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 3: Bit 2 - (1 = active)
B8 uses different coding I believe, again pm DJAlix as he's the expert...
Does anyone know why VCDS isn't able to read some modules on my B9 (eg Module, 46, module 35)? No issue reading module 08 for example. I'm using the latest fully registered version 18.2.1 on a Windows 10 64 bit laptop.
Cheers
Cheers
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
Only Hex-net versions of VCDS cables can fully access the latest models (like the B9. F5 etc)Does anyone know why VCDS isn't able to read some modules on my B9 (eg Module, 46, module 35)? No issue reading module 08 for example. I'm using the latest fully registered version 18.2.1 on a Windows 10 64 bit laptop.
Cheers
Original VCDS Hex-net | VCP | Odis-S | Odis-E | A3 8V Facelift Limousine
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
...you mean "Hex" I think as both the Hex Net (Wifi) and Hex V2 (cabled) interfaces will work with no issues. Only reason to purchase a Hex Net interface at the moment is for Wifi capability / VCDS Mobile, or because you need to fully talk with Lamborghini's.
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
Eh no...
The previous version was Hex-CAN. The new versions are called Hex-NET. Both the wifi or cabled are hex-net
www.ross-tech.com/vag-com/faq_6.php
Original VCDS Hex-net | VCP | Odis-S | Odis-E | A3 8V Facelift Limousine
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
Nope...
Hex net and hex v2 are the new interfaces, both work with all cars bar lambo’s, which need a hex net for full compatibility. I use both daily and both work fine on B9’s and alike.
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
Really...thats exactly the same what im saying. The new interface protocol / connection is called Hex-NET, where the previous was Hex-CAN. With the new versions you also have experimental coding. Its not just the name but the whole interface / software behind it.
Read your own post! Again a weird response....
I'm using tools like vcds for longer then 10 years now...also on a daily basis.
Original VCDS Hex-net | VCP | Odis-S | Odis-E | A3 8V Facelift Limousine
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
Now you just correcting yourself as you posted originally that hex net was the only B9 / MLBevo compatible interface. The hex V2 is also, which is not a “NET”.
The main reason for my jumping in on this conversation is that some people might have taken your advise as gospel and purchased the more expensive interface when in fact they could have purchased the lower cost option instead.
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
I said versions....plural. I think that we both mean the same, but we have different meanings for "hex-net" . For me both cables are the same. You see the name as the difference.
Lets leave it like this.
Original VCDS Hex-net | VCP | Odis-S | Odis-E | A3 8V Facelift Limousine
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
Ross-tech sells the following:
-Hex-net
-Hex v2
These are their names, and although mostly the same the “net” has more capabilities. Please stop giving incorrect advice.
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
The only difference is that "net" has more connection capabilities. The software part is the same.
Again you stick with the "names" and i use the software part. So not incorrect advise and please stop like you know everything..........
Original VCDS Hex-net | VCP | Odis-S | Odis-E | A3 8V Facelift Limousine
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
Am sorry but you said only hex net supports the B9, face it you are wrong! The back end maybe the same but the interface is not. People taking your your advice might have purchased a £600 hex net Interface as a result when in fact all they need is a v2 £400 one (pricing not exact).
You may have 10year plus experience but you really need to think before you offer advise on a public forum.
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
Ok DJALIX, you are right. Ok?
Maybe the difference is that we use on the mainland the same names for the software/interfaces and in the UK not.
Really....you are saying that to me? Like you wanted to correct me yesterday with VCP + MLBEVO + Disable startstop? Then you should also think and know the basis before correcting someone.
Original VCDS Hex-net | VCP | Odis-S | Odis-E | A3 8V Facelift Limousine
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
Am sorry but you said only hex net supports the B9, face it you are wrong! The back end maybe the same but the interface is not. People taking your your advice might have purchased a £600 hex net Interface as a result when in fact all they need is a v2 £400 one (pricing not exact).
You may have 10year plus experience but you really need to think before you offer advise on a public forum.
Actually no, Ross Tech invented the naming conventions as it’s thier product and they are based in the USA I believe... so regions have nothing to do with it. The tools maybe “the same but different” but the difference is actually pretty substantial, especially on the price.
This is a public forum, very very very respected as the community here do not mess about and look for facts. Someone viewing your advice, although not totally incorrect, could have wasted money for no good reason. Simple, that’s it... no more no less.
As for the Start / Stop comment, no games and not trying to show you up. I simply posted what was in the official documentation for the application in question. You actually showed me something that I had missed, mainly because the VCP update / release notes are never detailed and they are too busy fighting VW Group in an IP court battle at the moment to actually inform their customers of new features etc. Have tested, it works, happy days and thanks.
- Joined
- Sep 12, 2010
- Messages
- 34,881
- Reaction score
- 15,946
- Points
- 113
Ok, let’s get this sorted. This is a public forum and as @DJAlix has pointed out we are well known for the accuracy of the information that we have freely available to our members. This information must be correct as other members may purchase software that is above their requirements at an extra expense to them and that is not ideal. To have Odis software in your signature you have to be dealer certified and also be a site sponsor. The information you may give a member may not be 100% accurate and can cause damage to a members car and none of this is what we want to occur, If you wish to be on the forums vcds map fill in the details on the link below. On receipt of the application you will be added to the vcds map and will have the forums official vcds banner applied below your avatar. If you wish to be carrying Odis in your signature you must be a site sponsor. Please update your signature by removing Odis and vcp details. Feel free to contact me by PM if you disagree with any of the above.
https://www.audi-sport.net/xf/applicationform/vcds-application.3/form
https://www.audi-sport.net/xf/applicationform/site-sponsor.4/form
Last edited:
@DJAlix
I believe you are located in London, do you have any plans to visit N England/Scotland on a VCDS coding tour? I say this as I've almost given up doing the coding myself on VCDS on an el-cheapo ebay kit and I suspect most/all of the issues are down to the cheap cable. What did I expect for £70? lol On the other hand spending £400+ just on a cable is way overkill for me as I only need a few mods done and probably won't touch it again ever wrt VCDS.
I believe you are located in London, do you have any plans to visit N England/Scotland on a VCDS coding tour? I say this as I've almost given up doing the coding myself on VCDS on an el-cheapo ebay kit and I suspect most/all of the issues are down to the cheap cable. What did I expect for £70? lol On the other hand spending £400+ just on a cable is way overkill for me as I only need a few mods done and probably won't touch it again ever wrt VCDS.
Re: enabling audio chirping when locking/unlocking car, can this be done through central electric module 09 (which I can access) instead of module 46, which i cannot access? If it can be done via module 09, what are the settings needed?
Cheers
Cheers
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
RJ-8V
Registered User
- Joined
- Jun 16, 2017
- Messages
- 748
- Reaction score
- 189
- Points
- 43
I'm based in Inverness, however happy to travel to anywhere in Scotland (including Bonnybridge) and parts of N England it it means getting my car coded by someone who knows what they're doing, instead of just your average VAG technician. Will you be visiting Bonnybridge personally or can you recommend someone there?
DJAlix
VAG CAR CODING
Site Sponsor
VCDS Map User
VAG Can Professional
ODIS (Offboard Diagnostic System)
I provide support services to a rather big performance company there. I can see if I can arrange for them to host a remote session between myself and your car if you like....
