Good evening all!
It's been quite a while since I've been active on ASN, so I figured I'd post an update on my A3.
I've had this one about 18 months now, I bought it to replace my lovely C6 A6 3.0TDi Quattro as it was costing me the earth to run! I swore I'd keep this one standard, but, well, I don't have to explain myself to you lot...
Spec (as I bought it)
* 2013 A3 8V 2.0TDi Sportback S-line
* Bang & Olafson
* Cruise control
Spec (as it sits now), I have carried out all work, with the exception of the remap, myself. It goes to Audi for servicing only.
* DervTech rolling road remap - 200BHP, 336Ft/Lbs
* Autolights/wipers
* Light up cupholder
* Clearmounts magnetic phone mount
* LED interior lights
* Various VCDS tweaks including CH/LH light, oil temp etc
* AP coilovers
* 19 x 8.5" ET42 Riviera RV135 wheels with 235/35R19 Falken tyres
* Black honeycombe Front grill
* Reiger rear diffuser
* Maxton Design front splitter
* Maxton Design rear spoiler extension
* 15% window tints
* Equipment designation badges deleted
* Carbon rear Audi rings
* Custom built 12" JL Audio sub in ported enclosure with 250W RMS JL Audio amp. This was entirely my design and built. It fits perfectly under the boot floor (which has been raised about 20mm). It connects to the factory wiring harness, and can easily be removed to lower the boot floor, and access the spare wheel and jack.
And now for the pics
All comments, questions and criticisms welcome, I’m out of ideas now!
Cheers
Ben
It's been quite a while since I've been active on ASN, so I figured I'd post an update on my A3.
I've had this one about 18 months now, I bought it to replace my lovely C6 A6 3.0TDi Quattro as it was costing me the earth to run! I swore I'd keep this one standard, but, well, I don't have to explain myself to you lot...
Spec (as I bought it)
* 2013 A3 8V 2.0TDi Sportback S-line
* Bang & Olafson
* Cruise control
Spec (as it sits now), I have carried out all work, with the exception of the remap, myself. It goes to Audi for servicing only.
* DervTech rolling road remap - 200BHP, 336Ft/Lbs
* Autolights/wipers
* Light up cupholder
* Clearmounts magnetic phone mount
* LED interior lights
* Various VCDS tweaks including CH/LH light, oil temp etc
* AP coilovers
* 19 x 8.5" ET42 Riviera RV135 wheels with 235/35R19 Falken tyres
* Black honeycombe Front grill
* Reiger rear diffuser
* Maxton Design front splitter
* Maxton Design rear spoiler extension
* 15% window tints
* Equipment designation badges deleted
* Carbon rear Audi rings
* Custom built 12" JL Audio sub in ported enclosure with 250W RMS JL Audio amp. This was entirely my design and built. It fits perfectly under the boot floor (which has been raised about 20mm). It connects to the factory wiring harness, and can easily be removed to lower the boot floor, and access the spare wheel and jack.
And now for the pics
All comments, questions and criticisms welcome, I’m out of ideas now!
Cheers
Ben
Last edited: