Anybody lowered an S-Line on Eibach pro-kit springs

[Mazi]

As per title?
How much will it lower the car by given the S-Line is already lower?

This statement from Eibach is a bit concerning.............
Fitment Notes: All spring measurements are approximate.if you have a sport model such as Sline or Msport. you may not see as much lowering. Without levelling control. Except vehicles with 4WD

 

[B5NUT]

My C6 was on a Eibach pro kit and it gave about the same ride height as the sline setup.

 

[Mazi]

Arch gap looks a bit better to my eyes.
Is that not an S-Line?

 

[B5NUT]

It was a 3.0TDi quattro sline which has the FL front-end fitted on it.

The original shocks & springs on my C6 were well past it, so could have been low due to age related wear, but measuring ride height before and after there was not much difference.

 

[KrisKrk]

Comfort wise, was there any difference?


Sent from my iPhone using Tapatalk

 

[DPM]

The Eibach Pro springs are a 30mm drop so on the S-line model you'd see a max drop of 15mm but more towards 10mm.

Damian @ DPM Performance

 

[B5NUT]

Comfort wise, was there any difference?


Sent from my iPhone using Tapatalk

Very much so, but my old shocks & springs were over 160K miles, the shocks were absolutely destroyed , they had no rebound and should have gone to the bin many miles before that.

 

[dale86]

I'm currently looking to lower my 2010 special edition also. I have done a little net searching and found that eibach apparently do a 40/50 mm lowering spring kit but it's only available from larkspeed this sounds much better as if you have a s line le man's or special edition model your not going to hardly see any difference .