Exterior window trim gap with seal above B-pillar

VWNCC

Registered User
Joined
Jun 25, 2014
Messages
468
Reaction score
358
Points
63
Location
NULL
Hi All:

I am just wondering if anyone can post close-up pictures of the gap between the exterior window trim and the seal above the B-pillar for the rear door.

I find the gap to be quite a bit bigger than the gap of the front door. I am just wondering whether this is normal.

Thank you very much in advance.
 
Hi All:

I am just wondering if anyone can post close-up pictures of the gap between the exterior window trim and the seal above the B-pillar for the rear door.

I find the gap to be quite a bit bigger than the gap of the front door. I am just wondering whether this is normal.

Thank you very much in advance.


Just realised mine is the same. Both sides. Hopfully someone else will come along and confirm if there's is the same or not.
 
Image
Sorry it's dark outside, I'll try and post one tomorrow if nobody else posts before then.
 
Looks perfect I'll get a better photo of mine today. Hopfully the op comes back on to tell us weather his us a hb or a saloon

Saloon.

Someone on another forum posted the picture with the angle that showed exactly what I have as well, so it is probably normal. :)

0a02f90f8a6d45def01be1af3fda87bc.jpg
 
Saloon.

Someone on another forum posted the picture with the angle that showed exactly what I have as well, so it is probably normal. :)

0a02f90f8a6d45def01be1af3fda87bc.jpg

Ah I see what you mean now. I'll have a look at mine tomorrow and see if mines like that, I thought you ment the gap like my photo. Both rear door trims have a little gap whereas the 2 front doors don't.

Can you check and see if your trims are like mine ??
 
Ah I see what you mean now. I'll have a look at mine tomorrow and see if mines like that, I thought you ment the gap like my photo. Both rear door trims have a little gap whereas the 2 front doors don't.

Can you check and see if your trims are like mine ??

Yup, mine is like yours too in the front.

I have done the crazy thing and checked out many saloons in the dealership. There is quite a bit of variability...it feels like the gap design tolerance isn't super tight.