Jay's 2.0CR 395hp 650nm

[bobby singh]

CBBB
2.0 CR
BSR CP3 kit
BSR Ported head with custom springs
Hybrid VKLR
Injectors - yes it has some
Plus other custom parts



Cheers
Bobby

 

[Gazwould]

Crikey , I hope it's a quattro ?

 

[gray99y]

That's impressive, my 2.0tdi runs at 208bhp

Sent from my SGP621 using Tapatalk

 

[344bigal]

Now that's impressive, I'd love to see some more about this car.

Sent from my SM-G920F using Tapatalk

 

[bobby singh]

Thanks guys - alot of custom and unique parts.
Glad all the parts work so well

 

[desertstorm]

Impressive but why is it a world record? . Surely adding some nitrous onto a lesser build would net more power. I believe that the car is a FWD as the dyno is in shoot out mode 4F which is for 4 cylinder Forced induction cars. Shoot 44 would be for a 4WD car. So I bet that's interesting to try and drive quickly in the wet . The custom springs to try and keep the inlet valves shut due to the amount of boost pressure ?

 

[Darren92]

My 2.0 TDI (Passat) standard is 240ps/500nm although it is helped along by 2 turbos

Your work is impressive however, I don't think I could justify the cost though!

 

[bobby singh]

Impressive but why is it a world record? . Surely adding some nitrous onto a lesser build would net more power. I believe that the car is a FWD as the dyno is in shoot out mode 4F which is for 4 cylinder Forced induction cars. Shoot 44 would be for a 4WD car. So I bet that's interesting to try and drive quickly in the wet . The custom springs to try and keep the inlet valves shut due to the amount of boost pressure ?

Karl anyone can add nos but thats cheating lol
There is no one that I'm aware of thats running over 255hp in the UK. In Europe there are many claiming 280hp or even 300hp but yet this car at 255hp was pulling same 1/4 mile times and trap speed as higher claiming cars - pretty conclusive for me.
Yes its FWD - has wheel hop at 3k and wheelspin in the dry at 4.5k (in 3rd).
Emp is 1:1 with boost so its flows really well with under 900deg egts.

 

[desertstorm]

I know what you are saying about dyno figures and real world performance, It's so easy to massage figures and even if there is no obvious attempt to get higher readings the absolute numbers don't always reflect the driveability or performance in the real world.What kind of 1/4 mile times is the car running ?.

 

[DeanoC]

****** impressive work but devils advocate here on the point of it if i may? That can't be fun to drive keeping it in a 1500rpm powerband from 3500k rpm to 5000 rpm? From a headline figures perspective you have more torque than my RS4! but i keep 90-100% of my headline torque from 3k to 8.5k whereas you go down to 60% of your headline figure within 1500rpm then have to change gear - that must be hard work/boring as hell?

Sent from my SM-G935F using Tapatalk

 

[bobby singh]

1/4 previously was 13.6 @ 102mph iirc
Hoping to get into 12's with good trap speed.

I think side by side it could take mine lol
But I have more plans for mine.

Deano - I agree its become more laggy but we've gain some rev's top end. Over 300hp between 3.5k to 5.2k
You soon forget about the lag

 

[Gazwould]

More plans....

 

[Horia]

What plans for your car Bobby?
S300...

 

[xJay1337]

****** impressive work but devils advocate here on the point of it if i may? That can't be fun to drive keeping it in a 1500rpm powerband from 3500k rpm to 5000 rpm? From a headline figures perspective you have more torque than my RS4! but i keep 90-100% of my headline torque from 3k to 8.5k whereas you go down to 60% of your headline figure within 1500rpm then have to change gear - that must be hard work/boring as hell?

Sent from my SM-G935F using Tapatalk

TDI ratios are much longer than a petrol not forgetting.

Compared to 2260 it's so much faster, it is a bit laggy compared to the 2260 true - but perfectly usable to drive daily if needed and it has so much more performance at the top end.

If you change at 5000 rpm revs revs drop to around 3500 so you are always in the powerband when on it and always making over 300 BHP.
Think of it like Vtec for diesels lol

Excellent work Bobby.

 

[2.0TDI_Jo]

CBBB
2.0 CR
BSR CP3 kit
BSR Ported head with custom springs
Hybrid VKLR
Injectors - yes it has some
Plus other custom parts



Cheers
Bobby

WTF!

 

[adamss24]

To the nigh Sayers I have been in a 2.0 tdi previously pushing over 300 Bhp also FWD- it was scary and nearly killed me Twice ! It had all the goodies: Bilstein PPs9 susp suspension, rs4 braces, sticky tyres on 19" wheels and a lot of custom parts as well. It was a pd engine running a gtb2260vklr hybrid. Good work as usually Bobby ! Well done mate !

 

[QuattroCalum]

300 bhp in a front wheel drive that's just asking for trouble


Sent from my iPhone using Tapatalk

 

[bobby singh]

To the nigh Sayers I have been in a 2.0 tdi previously pushing over 300 Bhp also FWD- it was scary and nearly killed me Twice ! It had all the goodies: Bilstein PPs9 susp suspension, rs4 braces, sticky tyres on 19" wheels and a lot of custom parts as well. It was a pd engine running a gtb2260vklr hybrid. Good work as usually Bobby ! Well done mate !

Cheers Chris - how are you?
New place all set up?

It's def a handful but fun at the sametime - like Jay said you better think twice before allowing the rev's to hit 3k

 

[adamss24]

Working on it mate, time goes a bit slow over here !

 

[bobby singh]

Update:
340 becomes 395hp
625 becomes 650nm

Old Vs New

So close to 400
Maybe on a cooler day
Enjoy

 

[bobby singh]

@desertstorm
Karl could you edit the title mate with:

"Jay's 2.0CR 395hp 650nm"

Cheers

 

[desertstorm]

Very impressive Bobby, well done. That's crazy power from a 2.0 TDI without any chemical assistance.

 

[bobby singh]

Thanks Karl
Indeed - it was a bit worrying logging this..
Pulls very hard once it grips

 

[QuattroCalum]

Thanks Karl
Indeed - it was a bit worrying logging this..
Pulls very hard once it grips

Should get a tyre sponsor for it

Sent from my ANE-LX1 using Tapatalk