Geoff Barker
Registered User
- Joined
- Feb 10, 2017
- Messages
- 3
- Reaction score
- 0
- Points
- 1
Hi everyone
I have done a vcds scan after the car seemed to go into a limp mode....... I'm new to the whole TDI thing so haven't a clue what I'm doing!
I think the important bits are as follows:-
1 Fault Found:
000802 - Engine Speed Sensor (G28)
P0322 - 006 - No Signal - Intermittent - MIL ON
Freeze Frame:
Fault Status: 10100001
Fault Priority: 5
Fault Frequency: 8
Reset counter: 40
Mileage: 99293 km
Time Indication: 0
Date: 2017.02.10
Time: 16:57:40
Freeze Frame:
RPM: 0 /min
Torque: 176.0 Nm
Speed: 0.0 km/h
Bin. Bits: 00000001
Bin. Bits: 01000011
(no units): 11.0
Angle: 0.0 °
Readiness: N/A
I think the important bit is the code P0322.
So the first thing I to ask if anyone has any info on how to remove it, I think I know where it is but it looks pretty inaccessible.
I'd really appreciate some help on this
Geoff
I have done a vcds scan after the car seemed to go into a limp mode....... I'm new to the whole TDI thing so haven't a clue what I'm doing!
I think the important bits are as follows:-
1 Fault Found:
000802 - Engine Speed Sensor (G28)
P0322 - 006 - No Signal - Intermittent - MIL ON
Freeze Frame:
Fault Status: 10100001
Fault Priority: 5
Fault Frequency: 8
Reset counter: 40
Mileage: 99293 km
Time Indication: 0
Date: 2017.02.10
Time: 16:57:40
Freeze Frame:
RPM: 0 /min
Torque: 176.0 Nm
Speed: 0.0 km/h
Bin. Bits: 00000001
Bin. Bits: 01000011
(no units): 11.0
Angle: 0.0 °
Readiness: N/A
I think the important bit is the code P0322.
So the first thing I to ask if anyone has any info on how to remove it, I think I know where it is but it looks pretty inaccessible.
I'd really appreciate some help on this
Geoff