2013 - A3 S line (3dr) - Tow Bar

[A4-SBlackEdition]

Hi,

Can you please help. I have just bought a 3 door A3 S Line and want to fit a detachable tow bar to tow a small trailer.

What I am struggling with is if I should fit a 7 pin with universal electrics or pay more and get the dedicated electrics? Incidentally my car does have parking sensors - not sure if this makes any difference to your recommendation?

Also, I want to fit the pre cut lower valance but I cannot find any pictures to see if the part comes with the s line honeycomb grille? Has anyone any ideas if this is the case and also how much Audi charge for the part?

thanks

 

[RichardT]

This thread gives a lot of info about the factory fitted towbar....
http://www.audi-sport.net/xf/threads/factory-fitted-towbar.231371/

I understand that you can get it retro fitted, including the rear bodywork section. But it would be a bit more expensive that the new option price.

The pics I took in the above thread are on a saloon Sport, not s-line. But I wouldn't think there is much difference.

 

[A4-SBlackEdition]

Thanks Richard, looks a tidy job on yours. I have been looking at the after market Westfalia ones and they are around £180 for the bar and then £20 for a 7 pin or £80/£100 for the dedicated electrics plus I believe it will need some programming?. Not had a price on the lower trim though so hope someone can advise.

Just unclear if I should fit the dedicated electrics given the age of the car and that it has parking sensors etc - on previous Golf I fitted the universal electrics myself and it worked fine.

 

[A4-SBlackEdition]

This is an example of the lower honeycomb section I have not sure if there is an OEM part with a pre-cut that still looks like this?

 

[RichardT]

I'm afraid you're not going to get a neat job like the oem for 200 quid. I would make absolutely sure what they are offering. I know some fittings just cut the bodywork -

 

[RichardT]

This is an example of the lower honeycomb section I have not sure if there is an OEM part with a pre-cut that still looks like this?

I would think that there is because you can get it as a build option. How much would it cost is another matter.

 

[A4-SBlackEdition]

Sorry, my post maybe was unclear the £200 is simply for the parts so would need to buy the lower trim that fits the bumper from Audi on top of this.

I definitely dont want to cut the bumper/trim!

 

[Mrles]

This is mine factory fitted on the A3 S Line Sportback. Same arrangement as previously shown. Only the flap is different.

 

[A4-SBlackEdition]

Thanks for the pictures. I will contact my local dealer to see how much the lower trim costs.

 

[A4-SBlackEdition]

This is mine factory fitted on the A3 S Line Sportback. Same arrangement as previously shown. Only the flap is different.

View attachment 83490 View attachment 83489

Just called my local audi and they could only check the parts on my car not ones I don't have fitted. I don't suppose you can see the part number on yours? Or anyone else knows what the part number is for an S Line pre-cut lower rear trim/valance?

 

[Mrles]

Just called my local audi and they could only check the parts on my car not ones I don't have fitted. I don't suppose you can see the part number on yours? Or anyone else knows what the part number is for an S Line pre-cut lower rear trim/valance?

You are in luck.
The part number of the flap is 8V3807397A
I Googled it and it gave this...
http://vagpart.com/parts/aud-8v3807397a/
Gives a complete breakdown of the bumper assembly. Remember this is for Sportback 2016 model. Just in case there's a difference.

 

[A4-SBlackEdition]

You are in luck.
The part number of the flap is 8V3807397A
I Googled it and it gave this...
http://vagpart.com/parts/aud-8v3807397a/
Gives a complete breakdown of the bumper assembly. Remember this is for Sportback 2016 model. Just in case there's a difference.

Thank you, appreciate your help. I will try the dealer again tomorrow and give them this number to see if they can confirm.

 

[Mrles]

Thank you, appreciate your help. I will try the dealer again tomorrow and give them this number to see if they can confirm.

No problem. I would be interested to hear how you get on.

 

[A4-SBlackEdition]

Update. Just had the required parts from Audi. For a 2013 3 door S Line you will need to buy the lower trim / valance and then 3 honeycomb inserts.

Part numbers are:-

A8V3 807 521 G1 RR
A8V3 807 819 A
A8V3 807 833
A8V3 807 820

 

[Peto Pedro]

This is an example of the lower honeycomb section I have not sure if there is an OEM part with a pre-cut that still looks like this?

Am really looking for this difuser .. where I can get it ?