OkI have, used it before I came a member of the forum and it comes in very handy but not in this instance lol
Just a note, the button in the pic is a left hand drive vehicle, where are you @Darren92 ?
Just a note, the button in the pic is a left hand drive vehicle, where are you @Darren92 ?
I think he is right on buying this if for rhd or you have to change all the other buttons around, I retro fitted this a few years back for a customer from the a5oc, he supplied parts tho.
When activating ADS without that button it will leave a error in VCDS till that's installed.
Think it was the larger butto and it can be had from kufatec with the loom to fit
Looking at mine it seems the button is integrated into the panel, I can't believe this bit it might be, does anyone else know?Im in the UK and I can get a part number for the LHD button but not the RHD. Its definitely possible (see pic below), just can't find the sodding part number for it!
I'm aware on the MMI 2G models there was a complete part number for the button (long rectangular one).
View attachment 69653
Darren.
what buttons are needed for you and I will dig the numbers out?
what is the part number you have for the LHD one?
Nice work, @Darren92. How did you identify the part number in the end, and where did you source it?
Fitted. Wired. Functioning
Happy Days Darren, nice work!
You have got me interested in adding the button now just to complete the mod!
Ended up going over Etka again and realised what I was looking for was described as something totally different.
Got it from TPS, it was £21 roughly. Only 1 wire needed going to the J519 as the switch already has an illumination and ground feed for the stop start button.
Can you post details on the fitting/wiring including button/trim removal tips and tricks, as the info on AudiEnthusiasts looks like a right ball ache and not worth the bother.
Hi Darren, I was wondering if you have had a chance to put together a guide for this mod? Thanks
Cheers mate...............gentle nudgeNo problem, I will gather info over the weekend and post it up.
Hi @Darren92 I was wondering if you have had a chance to put a short guide together for this retrofit?
Not yet as I don't think it needs one? It's all pretty self explanatory bar the one wire going into the J519, no other wires needed as the switch pack already has an illumination feed, ground and power being supplied by the original plug.
Hi @Darren92 I was wondering if you have had a chance to put a short guide together for this retrofit?