I just did a Complete timing belt service. measured value block, group 13 :
injector :
3 - -1.10
1 - -0.30
6 - +3.84
4 - +4.10
5 - +4.16
According to ElsaWin " If the values for all the cylinders of one cylinder bank are noticeably outside the tolerance range,
check the toothed belt tension and tensioning roller "
Again, Services position, Covers, re chake toothed belt tension and tensioning roller and re made.
measured value block II
injector :
3 - -0.50
1 - -0.47
6 - +4.78
4 - +5.18
5 - +5.33
Start basic setting function 04 2 ° ATDC
2ֲ° ATDC
The Car driving great No fault codes
Any ideas?
injector :
3 - -1.10
1 - -0.30
6 - +3.84
4 - +4.10
5 - +4.16
According to ElsaWin " If the values for all the cylinders of one cylinder bank are noticeably outside the tolerance range,
check the toothed belt tension and tensioning roller "
Again, Services position, Covers, re chake toothed belt tension and tensioning roller and re made.
measured value block II
injector :
3 - -0.50
1 - -0.47
6 - +4.78
4 - +5.18
5 - +5.33
Start basic setting function 04 2 ° ATDC
2ֲ° ATDC
The Car driving great No fault codes
Any ideas?
Last edited:
