Cruise control stalk

[Conza]

Right I fitted my brand new cruise control stalk I got from tps using my reg and I'm having a problem with the main beam
It works just when u push it foward it don't stay there
Is this normal or is my stalk broke as I now have main beam flash thing when I push and pull the stalk :/

Any help will be appreciated as it my new genuine stalk is broke tps can have it back

 

[NHN]

Wrong talk mate, take my word for it.

 

[Conza]

how annoying is that and I gave tps my reg to get the correct kit

 

[Adam Wilson]

Reg isn't always 100% accurate, but TPS have direct access to the OE parts database so it's 'probably' the right one. Sounds like its broke though!

 

[Conza]

Reg isn't always 100% accurate, but TPS have direct access to the OE parts database so it's 'probably' the right one. Sounds like its broke though!

I dunno what to do as dunno if it broke or wrong :/ part number on kit I fitted is 8p0 054 690 B which is right compared to all the threads but no one mentions the b?

Plus on the booklet inside it metion 2010 onwards on cover :/

 

[Ceylon]

Can you code the momentary press on these? I certainly have seen the option on my CECM! The later cars stalks do work as per the one you've bought. I tap the stalk forward, highbeam comes on and the stalk returns to the centre position.

 

[Sayam]

When you pull the indicator stalk towards you, the main beam should stay on for the duration you pull the stalk

When you push the indicator stalk away from you, the main beam comes on and the stalk returns to the centre position. The main beam stays on

With the main beam still on and the indicator stalk in the centre position, you pull the stalk towards you. The main beam switches off and the stalk returns to the centre

That is how mines works. My cruise was retrofitted by @NHN

 

[Conza]

not sure on coding it in but got another stalk coming tomorrow from tps so must be wrong one :/