- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
So after a bit of a cockup at UPS it finally arrived...
Looms all present and correct...
The main adaptor looks fully loaded so cd changer and bose etc... the line outs are wired in too which will make it easier to graft in the RCA adaptor loom...
Double DIN console ready.... will take the cage out and fit into my car rather than use the whole console of course but its useful for out of the car mocking up
...a quick test fit...
The double DIN climate unit I have is not a soul black (soft touch) version like the one I have in the car... this means the buttons are mint but it looks a little off comparedto the rest of the interior but it will do until I can sort a proper one out
As you can see the A4 RNS-E is a little too wide at the top so some trimming required there... the aluminium strip at the bottom also need to go...
As you can see... need to trim the back of this to allow this to fit...
Should be fun
<tuffty/>
Looms all present and correct...
The main adaptor looks fully loaded so cd changer and bose etc... the line outs are wired in too which will make it easier to graft in the RCA adaptor loom...
Double DIN console ready.... will take the cage out and fit into my car rather than use the whole console of course but its useful for out of the car mocking up
...a quick test fit...
The double DIN climate unit I have is not a soul black (soft touch) version like the one I have in the car... this means the buttons are mint but it looks a little off comparedto the rest of the interior but it will do until I can sort a proper one out
As you can see the A4 RNS-E is a little too wide at the top so some trimming required there... the aluminium strip at the bottom also need to go...
As you can see... need to trim the back of this to allow this to fit...
Should be fun
<tuffty/>