My Audi S3 Sprint Blue 2010

I've got one just not fitted it!
May fit it after I've fitted my h&r roll bars
 
  • Like
Reactions: grchmason
Once I've done it I'll let you know what it's like to do with hands like shovels!
 
  • Like
Reactions: grchmason
Fitted my rear bar today maybe fit the front tomorrow or Monday. RS4 valve after that!
 
  • Like
Reactions: mechanic69 and grchmason
From ordering until delivery was 1 week, it converts to £295 but paypal charge £13 for currency conversion.
They were delivered by parcelforece and the proper job.
Fitted the front today and I'm very pleased.
RS4 valve tomorrow.
 
  • Like
Reactions: mechanic69 and grchmason
From ordering until delivery was 1 week, it converts to £295 but paypal charge £13 for currency conversion.
They were delivered by parcelforece and the proper job.
Fitted the front today and I'm very pleased.
RS4 valve tomorrow.

Cheers for the link, I've found the S3 to be so planted how much of a difference does it make??
 
  • Like
Reactions: grchmason
From ordering until delivery was 1 week, it converts to £295 but paypal charge £13 for currency conversion.
They were delivered by parcelforece and the proper job.
Fitted the front today and I'm very pleased.
RS4 valve tomorrow.


Excellent! I hope your going to be keeping notes for us fitting tips mate lol!!!!

Great a week delivery not to bad at all, Paypal however really annoys me always take take take!!!
 
I'm going to use a how to from another forum.
If it's any good I'll post the link.
Since I fitted the rear bar yesterday and the front today I'd say the rear made the biggest difference but it's much flatter when cornering and doesn't under steer anymore

Paypal are a joke with charges but the cheapest I could find the bars here were £350 plus delivery with some places charging £395!!
 
  • Like
Reactions: grchmason
I'm going to use a how to from another forum.
If it's any good I'll post the link.
Since I fitted the rear bar yesterday and the front today I'd say the rear made the biggest difference but it's much flatter when cornering and doesn't under steer anymore

Paypal are a joke with charges but the cheapest I could find the bars here were £350 plus delivery with some places charging £395!!

I read the best bang for your buck is changing the rear only, front one is a pain to fit too, how did you find doing it?
 
  • Like
Reactions: grchmason
Rear one 40 mins on the floor using axle stands.
Front one on a lift total time 1.5 hours that included re aligning the subframe etc.
I was surprised how easy it was.
 
  • Like
Reactions: grchmason
LOL! well if the links any good and fittings straight forward post it :icon thumright:

I was shocked when you said the price if I'm honest and Paypal ain't to bad when your paying that though! But in general there robbing gits!!!!!!
 
  • Like
Reactions: mechanic69 and Marshy
Rear one 40 mins on the floor using axle stands.
Front one on a lift total time 1.5 hours that included re aligning the subframe etc.
I was surprised how easy it was.

Rear one does look easy front needs the subframe dropped I thought, fitting guide would be good
 
  • Like
Reactions: grchmason
MOT Time.............

The old girl went straight through No advisories!!!!!! Always a wait off my mind with it being done at AUDI but I had Mot protection anyway lol!!!!!

More cleaning and some legal German style pressed plates have so improved the look!

Revo Power Stage 2+ is on route too I can not wait hoping everyones planning for there Xmas presents lol!!!!!!




























 
Just reading your post , I just got a 2011 sprint blue sportback s3 And Love it. I to have just got my Revo cai of Pat @LVS Racing .great guy. I to was going to go down the revo route for remap, until I have found a great tuner (tuning Werkes) just round the corner to me so going Apr now, I have noticed they normaly have have a winter software sale in November so holding out hoping for 20% off.
I also love the eibach springs on the front that 1inch drop makes it look so much sweeter.plus I understand it helps handling. Also looking at getting the bilstein b8 sprints from dpm spoke to Damien said he can get the b8 sorted to take the bilstein shocks aswell. And to complete it would like some H&R anti-roll bars.
As for the HPFP I think I'm going to go with pats November deal (great price) .
Also looking at getting the miltek turbo back with black ceramic tips love it, then here come stage2+ .
What mileage was yours when you got it chipped mines 29k at the moment, love your thread keep the good work up.
Dave

I use Tuningwerkes for all work on my car including servicing ... Reuben is an out and out APR man and has little time for most other supplier's maps. He's also good at making sure I dont spend money on silly mods (well usually think they are OK and then he points out if its worth it - suffice to say I have a few items around the house that I need to convince him to fit!!)
 
Rear one 40 mins on the floor using axle stands.
Front one on a lift total time 1.5 hours that included re aligning the subframe etc.
I was surprised how easy it was.

Eibach produce a pair that have the mounting brackets pre-fitted - I have these on mine.
 
Fitted my RS4 valve in 1.5 hours!!
The only awkward bit was trying to enter the new one.
I'll post the how to link later as the wife wants to go shopping now
 
  • Like
Reactions: grchmason
Fitted my RS4 valve in 1.5 hours!!
The only awkward bit was trying to enter the new one.
I'll post the how to link later as the wife wants to go shopping now


Thats not to bad at all time wise ..... Well done fella

Look forward to the right up, Women hey lol!!!!
 
I am starting to think though that Marshy is a general Legend, Were i'm not lol!!!!

I mean he even then went out shopping with the MRS lol!!!!! :applaus::anbet::anbet::anbet::anbet::anbet:
 
  • Like
Reactions: Marshy
Well I got my stone chips on the front sorted today , also took advantage of the good weather and fitted my Revo cai thanks to LVS racing (pat) .
This is my only mod so far ,However I swear it just feels different already seems more responsive , maybe just me. I then thought sod it I need the turbo exhaust now, so I got on the phone to BCS and ordered a sport system which will be ready in 12-14 days I know some guys have gone for the power vavle.
But my line of thought is if I. Paying £1000+ then I want to hear a little bit more then when I hit 3.500k, anyway it's ordered once I get this I will book into APR for stage 2 then save for pump and H&R anti -roll bars and some Stx or Kws (ain't made my mind up yet) was going to go down the bilstein and eibach route but don't think I will be happy with it it .
Dave
p.s is there a how to post picssome where.
 
Update time! finally had everything in place and ready and it's AMAZING!!!!!!!!!!!!!!!

TTS Roadsport in Bedford I arrived ................



Autotech HPFP............Check

Milltek full system..........Check

RS4 Fuel pressure Valve.........Check

REVO stage 2+ Map ..............Check

Sach's Organic Clutch kit........Check

LuK New dualmass Flywheel......... check


Arrived early for the clutch to be fitted as its pretty much a days work! So with being the first in as to speak I got to see all the top cars arrive 2x Golf Ed 30 1x Cupra K1 all looked and sounded amazing! All being the technicians cars I knew I was in the best possible hands Shaun who owned the Seat Cupra K1 was left with doing all the work on my S3 ....

A few pics below of there TTRS & if you look over to your right your see the 3 TFSI engined beasties lol!!!
















Old Fuel pump and Follower was in great condition so that was good to see!










A random of Me chilling! I took my IPad so was home from home really lol!!!!!!











Gearbox out time ohhhhhh :kissmyrings::applaus:
















All going back together !! Getting there now!!









By the time it was all done it was indeed dark so more updates to come but I so Love Stage 2++++++++++++ :arco::arco::arco::arco::arco::arco:
 
  • Like
Reactions: Marshy, Davjon747 and mechanic69
Update time! finally had everything in place and ready and it's AMAZING!!!!!!!!!!!!!!!

TTS Roadsport in Bedford I arrived ................



Autotech HPFP............Check

Milltek full system..........Check

RS4 Fuel pressure Valve.........Check

REVO stage 2+ Map ..............Check

Sach's Organic Clutch kit........Check

LuK New dualmass Flywheel......... check


Arrived early for the clutch to be fitted as its pretty much a days work! So with being the first in as to speak I got to see all the top cars arrive 2x Golf Ed 30 1x Cupra K1 all looked and sounded amazing! All being the technicians cars I knew I was in the best possible hands Shaun who owned the Seat Cupra K1 was left with doing all the work on my S3 ....

A few pics below of there TTRS & if you look over to your right your see the 3 TFSI engined beasties lol!!!
















Old Fuel pump and Follower was in great condition so that was good to see!










A random of Me chilling! I took my IPad so was home from home really lol!!!!!!











Gearbox out time ohhhhhh :kissmyrings::applaus:
















All going back together !! Getting there now!!









By the time it was all done it was indeed dark so more updates to come but I so Love Stage 2++++++++++++ :arco::arco::arco::arco::arco::arco:
Can I ask how much it all came to for the clutch, I feel at the moment every day feels like 7 days got the cai fitted, exhaust on order, saving for HPFP , and map, but have just had payout today for some prat clipping me in tesco ,been done today ( see build post for pics) and now after picking up noticed in wet not gripping to well has the Bridgestones on at the moment backs are ok but fronts are wiped out,so do I put two new on front or change all four ?
So happy you though

Dave
 
Last edited:
  • Like
Reactions: grchmason
Nice update. Just watching on my Autotech bits so I can do 2+.
 
  • Like
Reactions: grchmason
Can I ask how much it all came to for the clutch, I feel at the moment every day feels like 7 days got the cai fitted, exhaust on order, saving for HPFP , and map, but have just had payout today for some prat clipping me in tesco ,been done today ( see build post for pics) and now after picking up noticed in wet not gripping to well has the Bridgestones on at the moment backs are ok but fronts are wiped out,so do I put two new on front or change all four ?
So happy you though

Dave



Hi Dave

No probs at all I will Message you across prices etc

I know how you feel for me its all about timing of hiding it all from the Mrs lol! Thanks again Revo Stage 2+ really is just so much fun!!

Anti roll bars next ..................
 

Similar threads

Replies
64
Views
6K
S
Replies
16
Views
7K