Made some changes to my new A3 Saloon, many thanks to Dannykn9 who is a top bloke
We found the following:
Security Access to modules
--------------------
If certain module is locked, you should go to "Security Access" and enter the proper code:
For [09] Central Electronics the code is 31347 - WORKED
For [03] ABS Brakes the code is 40168 - DID NOT WORK
For [10] Parking aid the code is 71679 - WORKED
[09] CENTRAL ELECTRONICS
Acoustic (Alarm Beep) on Lock - WORKED WITHOUT ISSUE
--------------------
NOTE: Car makes one chirping sound, does not use the horn.
[09] Central Electronics -> Adaptation ->
Acknowledgement Signals - Akustische Rueckmeldung verriegeln (Lock acoustic feedback)
CHANGE: Set each or one of them to Yes
Acoustic (Alarm Beep) on Unlock - WORKED WITHOUT ISSUE
--------------------
NOTE: Car makes two chirping sounds, does not use the horn.
[09] Central Electronics -> Adaptation ->
Acknowledgement Signals - Akustische Rueckmeldung entriegen (Un-lock acoustic feedback)
CHANGE: Set each or one of them to Yes
Acoustic Lock Menu (only for lock, enable/disable using DIS) - WORKED WITHOUT ISSUE - New Menu Option in the MMI.
--------------------
NOTE: From factory there was no option to enable/disable using DIS.
[09] Central Electronics -> Adaptation ->
Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung
CHANGE: Set Yes
Visual confirmation of comfort closing - DID NOT WORK
--------------------
[09] Central Electronics -> Adaptation ->
Acknowledgement Signals â Comfort closing ack??? (need to check it back)
CHANGE: Set Yes
[17] INSTRUMENT CLUSTER
Enable Pointer Test / Staging / Staging - WORKED WITHOUT ISSUE
--------------------
[17] Instruments -> Coding -> Byte 1 ->
CHANGE: Enable Bit 0
Set Oil Temperature on all DIS Menus - WORKED WITHOUT ISSUE
--------------------
[17] Instruments -> Long Coding -> Byte 10
CHANGE: Tick Bit 1. Display Oil Temperature
Activation of the lap timer / lap counter in the FIS - WORKED WITHOUT ISSUE
--------------------
NOTE: Seems to work only with Color Information System
[17] Instruments -> Long Coding -> Byte 1 ->
CHANGE: Enable Bit 3
Display the oil temperature gauge in the FIS lap timer - WORKED WITHOUT ISSUE
--------------------
[17] Instruments -> Long Coding -> Byte 1 ->
CHANGE: Enable Bit 3
Disable seatbelt warning - WORKED WITHOUT ISSUE
--------------------
[17] Instruments -> Long Coding -> Byte 0 ->
CHANGE: Set bits 2-4 using combo box
Change start screen - TESTED BUT NO ADDITIONAL SCREENS WERE AVAILABLE
--------------------
[17] Instruments -> Long Coding -> Byte 9 ->
CHANGE: Set bits 0-2 using combo box (not documented)
Indirect TPMS - PART TESTED. CHANGES TO 17 WORKED AND ICON / LAMP SWITCHED ON. UNABLE TO ACCESS 3 TO COMPLETE SETUP.
--------------------
[17] Instruments -> Long Coding -> Byte 4 ->
CHANGE: Set bit 0
[03] Brakes -> Long Coding -> Byte ??? ->
CHANGE: Set bits ???, ???
Visual representation of the parking aid (Audi Parking System APS) - WORKED WITHOUT ISSUE.
--------------------
[10] Parking aid 2 -> Long coding -> Byte 2 ->
CHANGE: Set Bit 0 - visual representation parking sensors
We also had a go at trying to set the dial illumination on permanently but could not find the setting as all the labels were in German. Has anyone worked this out yet?