How to remove Component Protection?

[spionsrs4]

I was updating my a6 2005 mmi and it stops.After trying 2nd time it shows up
Download error.I was reading that cd changer in on Component Protection.

Was interesting if I can remove it from vag com?

Or someone can do it from forum?

 

[gupsterg]

VCDS can not remove CP ...

When I had that message on my car it was a disc reading error ... I found the disc had a scratch on it ...

 

[spionsrs4]

I was checking with VCDS and i have
__________________________________
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: Cannot be reached 1100
4F-Centr. Electr. II -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000

And cd chnger have no faults
-------------------------------------------------------------------------------
Address 0E: Media Player 1 Labels: 4E0-910-111.lbl
Part No SW: 4E0 910 111 F HW: 4E0 035 111 A
Component: CD-Changer H44 0470
Revision: 00000000 Serial number: AUZ5ZBD6041056
Shop #: WSC 00000 000 00000
VCID: 1C3DA5D4DFB0D8E

No fault code found.
So it's just don't read software disc ? And changer don't have CP?
Can someone have some ideas?

 

[spionsrs4]

Allso have
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 4F0-910-468.lbl
Part No SW: 4F0 910 468 A HW: 4F0 907 468 B
Component: Gateway H09 0030
Revision: 09 Serial number: 0800804B26040A
Coding: 6CFE73C41B3504
Shop #: WSC 01211 210 175149
VCID: 27578A3896F60B6

1 Fault Found:
00463 - Control Module for Digital Sound Package (J525)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 55
Mileage: 235832 km
Time Indication: 0
Date: 2013.05.09
Time: 15:21:04
-------------------------------------------------------------------------------
Address 47: Sound System
Cannot be reached

So what can i do to get it back?
It's all after interrupted soft update

 

[gupsterg]

And changer don't have CP?

Your changer is not in CP... otherwise this fault would have appeared ...

1 Fault Found:
02095 - Component Protection Active

Allso have
1 Fault Found:
00463 - Control Module for Digital Sound Package (J525)
004 - No Signal/Communication
-------------------------------------------------------------------------------
Address 47: Sound System
Cannot be reached

So what can i do to get it back?
It's all after interrupted soft update

If in your shoes I would run this check Link:- Ross-Tech: VCDS Tour: Optical Bus Diagnostics

If elec./optical test "ok" , then I'd get discs that work and try reflash again ...

 

[s8craig]

Basically you've trashed the sound system during the firmware update, try again with new disks.

 

[spionsrs4]

Does someone have good cd updates?
I have 5570 can i go from 3350 to 5570

 

[spionsrs4]

And i have on bus diagnostic
--------------------------------------------------------------------------------


Control Module Part Number: 4F0 910 468 A
Component and/or Version: Gateway H09 0030

Optical Bus Diagnostic : Standard

Controller Electrical Optical
19-CAN Gateway OK OK
07-Control Head(High/D3) OK OK
0E-Media Player 1 OK OK
77-Telephone OK OK
47-Sound System ERROR ERROR
56-Radio OK OK
57-TV Tuner OK OK
37-Navigation OK OK

************************************************************

Does I need new bose amp?

 

[gupsterg]

Does someone have good cd updates?
I have 5570 can i go from 3350 to 5570

P/N for discs is 4L0 998 961 , have you asked your local main dealer?

I went from 2120 to 5570 ... ran disc 1 once , disc 2 twice (I have factory phone prep) , disc 3 once ...

And i have on bus diagnostic
--------------------------------------------------------------------------------

Control Module Part Number: 4F0 910 468 A
Component and/or Version: Gateway H09 0030

Optical Bus Diagnostic : Standard

Controller Electrical Optical

47-Sound System ERROR ERROR

Even with failed flash I would have thought that tests result would be OK / OK ... but your result of ERROR / ERROR could be because of failed flash ...

Did you have MMI / AMP issues before update?

 

[spionsrs4]

No.
Everything working but no sound because of sound system.

And I have all 3 cds MMI-5570-4L0.998.961

Where is fuse for bose amp?
And what to do with cd changer as it's don't want to read that software?
I burn different cd and same

 

[gupsterg]

Where is fuse for bose amp?

Will check and get back to you ...

And what to do with cd changer as it's don't want to read that software?
I burn different cd and same

Main dealer price for discs IIRC is less than £10 ...

 

[spionsrs4]

Any luck to find fuse for sound system

 

[gupsterg]

No.		Current Flow Diagram designation Fuse carrier ST2 (brown)	Nominal value		Function/component	Terminal
8	-	SF8 - Fuse 8 on fuse holder	30A	-	J525 -	Digital sound package control unit	30

Number 7 on above image is ST2 ... Fuse 8 = J525 ...

Location of fuses is on right hand side of boot behind trim ...

 

[B5NUT]

It's not uncommon for Bose amps to fail during updates, I've had 1 that failed during an update an had to be replaced. If you want to remove power from the AMP just unplug the large connector going into the AMP. If you have tried new discs and it's still not working then best have a look on ebay for a S/H unit, they can be picked up cheap, but you will need to remove CP via your local Audi dealer.

 

[spionsrs4]

Fuse is fine.
Thats not good news
I was checking errors whats showing on display and there is MOST 640,Klemme 550,
Switching shutdown and so so so....

 

[spionsrs4]

Does someone have cd which works?
Or audi dealers selling them?

 

[spionsrs4]

Do i need to do this to read cd's
2. in the ‘hidden menu’ goto MMI>Settings en set “SWDL manuell” and “SWDL ignore Region/VMC' (see picture in previous post) ON

3. insert the EU 5570 file CD in the CD changer on location 1
4. choose in the “hidden menu” for “Start Bootloader”
5. Unit will start update
6. When the update finished: leave the 5570 CD in the changer, and press SETUP & RETURN at the same time and choose “UPDATE”
7. The system will update
8. When finished: remove the 5570 CD from the changer
9. Insert the latest EU DVD in the DVD player
10. Check whether the unit will read the DVD and shows TMC etc.

 

[spionsrs4]

????

 

[gupsterg]

Does someone have cd which works?
Or audi dealers selling them?

This site seems to have some Link:- Audi Resource - MMI Menu

I'm not registered there nor have I used them from there ... once or twice when I tried duplicated CD's in changer it did not like them I'd personally get from main dealer as I don't like idea of a failed update due to bad discs ...

Do i need to do this to read cd's
2. in the ‘hidden menu’ goto MMI>Settings en set “SWDL manuell” and “SWDL ignore Region/VMC' (see picture in previous post) ON

3. insert the EU 5570 file CD in the CD changer on location 1
4. choose in the “hidden menu” for “Start Bootloader”
5. Unit will start update
6. When the update finished: leave the 5570 CD in the changer, and press SETUP & RETURN at the same time and choose “UPDATE”
7. The system will update
8. When finished: remove the 5570 CD from the changer
9. Insert the latest EU DVD in the DVD player
10. Check whether the unit will read the DVD and shows TMC etc.

Sorry can not advise on this ... S8Craig or try PM to Link:- A8 Tech back they are the guys ...

 

[gupsterg]

View posts 81 to 89 ... also take note of 89 ... Link:- Audio issues with MMI - Page 9

Also note the text in post 68 ... Link:- Audio issues with MMI - Page 7

 

[spionsrs4]

Is someone near St.Helens with vcds as with my i can't do adaptation.I need to get mmi hidden menu

 

[gupsterg]

This section of ASN vs the A3 & A4 sections is quiet ...

Have check on the VCDS map, PM a member and/or post in this section Link:- VCDS (formerly VAG-COM) forum

 

[spionsrs4]

All wotks fine.
I swap cd changer from friend and update done smoothly.

 

[gupsterg]

Great news ...