Audi A4 B6 - S Line Conversion - Exterior Only

[amz]

Hello everyone,

I have a standard Audi A4 SE Model and I initially wanted to put the Votex body kit on it, but since it is so rare to find I am thinking of doing the S Line Body Kit conversion instead.

Can anyone tell me roughly how much it would cost and what parts I need?

Thank you in advance

 

[amz]

Can someone also confirm for me if these are the correct S Line parts to convert my car fully into an S Line model?

Genuine Audi A4 B6 S-Line / Ultra Sport GmbH front spoiler. Metallic Silver | eBay

Genuine AUDI A4 B6 S LINE REAR BUMPER 2001-2004 | eBay

Genuine Audi A4 B6 door blades / door trim. Dolphin Grey Metallic | eBay

 

[CMD]

AMZ. Only the first item is the 2nd item is not as it does have the twin cut out the 3rd item are standard door blades/trims the S-line items have more flair .

 

[CMD]

This is the rear bumper Genuine Audi A4 B6 S-Line rear bumper (twin exhaust). Avant | eBay.

Ooops sory that's for an avant but you get the idea

 

[amz]

Thanks for the pointers, will the first one fit directly onto my existing bumper without any problems then?

 

[CMD]

Once you take the lower section off your SE bumper you have to do a slight modification .

This will hel you. You will have to sign up.Ultrasport lower with stock upper bumper how-to (lots of pics)

 

[amz]

I might aswell just wait for someone who will be breaking the whole Audi of A4 S line model, and I'll just buy everything at once.

Unless a Votex Kit comes up

 

[amz]

Sorry if this sounds stupid but does the S Line Kit have different side skirts or is it only the door blades?

 

[jbcalvin]

s-line skirts are the same as standard, they are just colour coded....

 

[amz]

s-line skirts are the same as standard, they are just colour coded....

Thanks for answering that. So really all I would need is Front and Rear Bumpers, Boot Spoiler and Door Blades that are S line? Any idea how much it would cost roughly second hand?

 

[quattrojames]

Thanks for answering that. So really all I would need is Front and Rear Bumpers, Boot Spoiler and Door Blades that are S line? Any idea how much it would cost roughly second hand?

You'd probably get the lower valances for <£70 from a dealer new and unpainted.

Not sure on the spoiler.

Door blades will stand you £100 ish each unless you get a luck find on ebay.

 

[amz]

You'd probably get the lower valances for <£70 from a dealer new and unpainted.

Do you mean to say the lower parts of the front and rear bumpers for £70 each?

 

[quattrojames]

Do you mean to say the lower parts of the front and rear bumpers for £70 each?

I made a typo, I meant to say <£100 - but yes I understand they're about £70 ish.

 

[amz]

I made a typo, I meant to say <£100 - but yes I understand they're about £70 ish.

Would this be the correct one to purchase then? Also would my current grills and fogs fit on this?

Genuine Audi A4 B6 S-Line / Ultra Sport GmbH front spoiler. Metallic Silver | eBay

 

[quattrojames]

Would this be the correct one to purchase then? Also would my current grills and fogs fit on this?

Genuine Audi A4 B6 S-Line / Ultra Sport GmbH front spoiler. Metallic Silver | eBay

It looks like the right part yes. Your current grilles won't fit, this is deeper. The fog grills are £15-20 each and the centre one about £80.

 

[scott b]

also look for later sports parts are these are the same as s line except the rear bumper as the s line has the twin cut outs

 

[amz]

Thanks mate, doesn't look like I'll need these any more though

also look for later sports parts are these are the same as s line except the rear bumper as the s line has the twin cut outs

 

[amz]

Is it possible to change the S Line rear bumper's bottom half to change from a exhaust cut outs to a non exhaust cut outs?

 

[quattrojames]

Is it possible to change the S Line rear bumper's bottom half to change from a exhaust cut outs to a non exhaust cut outs?

Yes, just remember saloon and avant aren't compatible.

 

[amz]

Yes, just remember saloon and avant aren't compatible.

Any idea how much it might be?

 

[quattrojames]

£70-100 off the top of my head.

 

[amz]

£70-100 off the top of my head.

It just makes me think it is quite expensive to do a conversion because what also adds up to the total cost is spraying the parts! Sad times...

Might just have to stick with changing the alloys and putting spacers on.

 

[unitzero]

I have an Sline front lower that no longer needed - was going to do the conversion myself but selling the car now

 

[B6Steve]

Wonder has anyone tries these door blades from Poland? - AUDI A4 B6 B7 DOOR BLADES DOOR FLARES LIST S4 STYLE | eBay

 

[Paul @ Unit 9 Remaps]

wondered this too

 

[amz]

Hello mate, can you pm me the details etc?

 

[starnon]

Check the feedback, one person didn't rate those door blades due to poor fit and quality, but others were happy with them. It's odd, to me at least, that there aren't more people, especially in the UK, making reproduction body parts for these cars. Just that with other car makes (mainly Japanese) there are dozens of places where you can get reproduction body parts.

 

[Paul @ Unit 9 Remaps]

everyone is going to slate in this and every thread about them been fibre glass and fitment, which this is wrong, same situation when i bought my leon cupra r bumper, was an excellent fit

 

[starnon]

Fibreglass wouldn't put me off from buying them, but would be interested to hear the experiences of anyone that has bought the ebay door blades and spoilers. It's often the case that fibreglass repros don't always have a consisten quality of production, I've seen folk getting a group buy of parts from one maker, most of whom are very happy but one or two people seem to get warped parts.

 

[PhilW]

I have an Sline front lower that no longer needed - was going to do the conversion myself but selling the car now

Would you sell the grills from it?

 

[chrisjmcqueen]

Might just have to stick with changing the alloys and putting spacers on.

What difference do spacers make ? Any pics or links ??