Mougge
Registered User
This is my Wellycooler before installation, Note my mounts.
Thought it might be useful to someone to see
Thought it might be useful to someone to see
Does anyone know if a welly cooler will fit a 225 TT?
Evening!
Began to mount my Wellycooler tonight but have encountered difficulties.
Just before the intake sits a plastic tube with an air mass sensor, I guess it is.
It must be removed when I install Wellycoolern. How does it affect the car can be no good?
I work on the picture but appreciate the quick response!
Hi rich, that is indeed a welly cooler 600x300x78 2.5'' inlet-outlet, most people on here have it with 3'' inlet-outlet i believe, i'm a steel fabricator so i did all the braketry and piping myself and still got headlights washer working (took me 3 full days to sort it outthough).I saw that but being new to this thread and forum. I that cooler on the TT, a 100% welly cooler or is it modified for the TT? Sorry for the silly questions
Fitted the AH Fabs V2 yesterday. What a nightmare job it was getting the bumper to fit afterwards. I have some pics but they are mostly the same as the ones above. Parts I used:
1x AH Fabs V2 cooler
2x 63mm alloy 90 degree bends
2x 63mm silicon 90 degree bends
1x Original 30 degree 4 inch long hose from the OEM setup
I' not 100% sure on which hose was used as I could use the original map sensor to SMIC hose as it was too short and it needed a bit of a bend to match up to the alloy 90 degree. The bumper still needs some more trimming and tweaking to fit underneath and I could only fit one horn in the end.
The major problem I had though was the TB to map sensor tube hose would just not stay on at the map sensor end. The hardest end to reach of course! It was reminiscent of the B5 TIP fitting where the 90 degree silicon to turbo adapter clamp just kept sliding off. The first time it popped off was on the ****** freeway and the car was horrible to drive, jerking loads. It was pretty horrid. Everytime I'd refit it and it'd be perfect on all sides them WOOOOOSHHH when it tries to come on boost. Take some tools on the test drive would be my advice! I've had to refit the damn hose about 5 times but it seems to be holding 22.5psi now I've given both parts a good clean with alcohol cleaner. Touch wood it'll be fine for the commute tomorrow!
Bit on the large side:
ordered mine today, been told theres a lil back log on them but hey ho
Wondering if I should start calling it the 'tufftycooler'
<tuffty/>
ordered mine today, been told theres a lil back log on them but hey ho
Hi All,
I'm new here, picking up my 02 S3 at the end of the week.
Regarding intercoolers, has anyone any experience with this kit on ebay?
AUDI S3 - FRONT MOUNTED TURBO INTERCOOLER KIT 20v Turbo 1.8 | eBay
I had a quick scan through this thread but couln't see it mentioned.
Any feedback/advice appreciated.
Will this kit fit on a forge Intercooler from a golf mk4 I'm planning on fitting it to my s3 2001 amk