CH/LH LiGHTS

[Yaseen1991]

Hello again, i no this has been coverd before but i cant find the correct post

Neway just had the rear facelifts adpated to work as they should (Thanks NAD, what a top guy!) he also enabled the ch/lh function but there not working :S

He did mention i need to earth a wire or something, but cant find the post, i did see that it might have something tp do with a switch :S

Just wondering if ne1 can shed any light on the situation and what i need to earth

Thanks

 

[josiah2007]

Hello again, i no this has been coverd before but i cant find the correct post

Neway just had the rear facelifts adpated to work as they should (Thanks NAD, what a top guy!) he also enabled the ch/lh function but there not working :S

He did mention i need to earth a wire or something, but cant find the post, i did see that it might have something tp do with a switch :S

Just wondering if ne1 can shed any light on the situation and what i need to earth

Thanks

Hi Yaseen, I also enabled this feature to my car about 6 months ago. It was pretty easy when I followed this link below:

cominghomelights - Audi Retrofit

It has a picture of the earth point which should be useful to you. :thumbsup:

 

[SWILKO]

Josiah2007,

Is the repair wire an Audi part or is it a case of making one up?

Cheers,

S

 

[josiah2007]

Josiah2007,

Is the repair wire an Audi part or is it a case of making one up?

Cheers,

S

Mine was made up - a piece of wire with the ends slightly stripped! Cheap n' easy! :thumbsup:

 

[Yaseen1991]

Cheers josiah2007. Gonna hav a crak at it first thing tomorro morning!

Thanks

 

[josiah2007]

Cheers josiah2007. Gonna hav a crak at it first thing tomorro morning!

Thanks

Let us know how you get on! :icon_thumright:

 

[SWILKO]

Cheap n easy sounds good, cheers J....

 

[Khufu]

There is also a multi earth point just under the carpet of the wheel arch under the fuse box, makes for tidier wiring.

 

[Jameze]

Is this all it takes?? That has got to be the easiest mod ever after switching the interior bulbs to LED's!

Is there any limitations to this? I was keen to do this a while back but decided against it after I heard there was repair wiring involved (in my head it was much more complicated than this!). Basically... will this work in my car? MY10 with Xenons (as per sig).

 

[grimp]

AFAIK if you have autolights/rainsensor, its only vagcom needed on the my09+. If u do not the autoswitch ur screwed, unless you retrofit..

 

[Dannykn9]

Just go to audi and ask for a repair wire 000 979 009. Only cost about £2 max. Then just strip one end. Follow the instructions in the link already provided. You will find connector E with the other connectors under the drivers side panel to the right. They are all marked with letters. Can be a bit fiddly to get out! There is a red tab which secures the connectors, you need to pull this away, then you can release the connector.
Once all coded, you may find the ch/lh does not work. Just unplug the and re-plug the connector and all should be good!

 

[ryanstewart9]

AFAIK if you have autolights/rainsensor, its only vagcom needed on the my09+. If u do not the autoswitch ur screwed, unless you retrofit..

So unlike the older models, you must have the auto-lights switch on the MY09+ in order to get CH/LH lights?