1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wiring in a sub and come across a problem...

Discussion in 'In-Car Entertainment' started by Keeno, Jun 16, 2009.

  1. Keeno

    Keeno Spooly Spooly Boosty Boosty!

    Joined:
    Apr 17, 2009
    Messages:
    701
    Likes Received:
    0
    Ran all my wires through from the boot to the front (aftermarket 12") only to find I have no phono sockets on the back of my HU (Pioneer DVD).

    Is there any way round this? Only have basic knowledge of ICE hence my asking...

    Cheers.
     
  2. Advert Guest Advertisement


  3. AndyMac

    AndyMac Moderator
    Staff Member Moderator

    Joined:
    Jun 10, 2003
    Messages:
    9,833
    Likes Received:
    44
    What model Pioneer is it?
    Never heard of any HU that doesn't have at least one set of pre-outs. They may not be on RCA's, so you may need an adapter. Or worst case if it really is that limited you'd have to use a hi-lo converter which will take the rear speaker output from the HU down to a low level pre-out, not perfect but should be OK for just a sub.
     

Share This Page