1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wing Mirror Tilt, Auto Fold Mirrors and Parking Sensors Volume

Discussion in 'VCDS (formerly VAG-COM) forum' started by vinesh, Jun 14, 2010.

  1. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 14, 2010]
    Hi,

    I have recently changed my car to a Audi A4 2.5tdi Quattro.

    1)

    The car has factory fitted electric memory seats, auto dimming mirrors and electric folding.

    I changed the soft code on Saturday to enable alarm beep when locking the car. But since changing the soft code the mirrors don't tilt down when reverse is selected.

    Original soft code for conv unit - 07115
    Changed to - 08139

    2)

    I can fold the mirrors via the switch on the drivers door, is there any way of automating this when locking the car?

    3)

    Final question - Can I change the volume for the front and rear parking sensors?

    I have the full version of VAGCOM.


    Many thanks
    #1
  2. Ads

    Ads

    [Sep 21, 2014]

  3. bearthebruce
    Offline

    bearthebruce Ross-Tech, LLC

    Joined:
    Jul 4, 2006
    Messages:
    332
    Likes Received:
    17
    [Jun 15, 2010]
    Post a full autoscan of the car so that others can see what is installed and what the part numbers of the modules are.
    #2
  4. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 15, 2010]
    Will post the full scan this afternoon.
    #3
  5. NHN
    Offline

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,320
    Likes Received:
    1,229
    [Jun 15, 2010]
    No you cant code auto folding with locking, I designed a circuit that does that, its not cheap, but works.

    Go into your pdc controller module 76 & check your adaptations channels as there are rear buzzer volume & frequency options that can be changed

    Did you have tilt before as I dont recall this in coding on the B6/7 & all you've done is add 1024 to original coding so shouldnt have affected anything else, what other modules have you accessed

    http://wiki.ross-tech.com/wiki/index.php/Audi_A4_(8E)_Comfort_System#Coding
    #4
  6. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 15, 2010]
    Thanks NHN - I have changed the volume and tone for the rear and fronts.

    Here is my autoscan -

    VAG-COM Version: Release 311.2-N


    Chassis Type: 8E - Audi A4 B6
    Scan: 01,02,03,08,09,15,16,17,26,36,37,45,46,55,56,63,76

    Address 01 -------------------------------------------------------
    Controller: 8E0 907 401 J
    Component: 2.5l V6 TDI G000AG 0006
    Coding: 02006
    Shop #: WSC 63251
    00006059 130 106LC150_1.V79142946482
    No fault code found.

    Address 02 -------------------------------------------------------
    Controller: 8E0 927 156 R
    Component: AG5 01V 2.5lTDI RdW 2222
    Coding: 00001
    Shop #: WSC 00000
    No fault code found.

    Address 03 -------------------------------------------------------
    Controller: 8E0 614 517 A
    Component: ABS/ESP allrad 3429
    Coding: 04457
    Shop #: WSC 06435
    No fault code found.

    Address 08 -------------------------------------------------------
    Controller: 8E0 820 043 AB
    Component: A4 Klimaautomat 1323
    Coding: 00000
    Shop #: WSC 63251
    No fault code found.

    Address 09 -------------------------------------------------------
    Controller: 8E0 907 279 F
    Component: int. Lastmodul RDW 0517
    Coding: 01011
    Shop #: WSC 63251
    No fault code found.

    Skipping Address 15-Airbags

    Address 16 -------------------------------------------------------
    Controller: 8E0 953 549 N
    Component: Lenks√°ulenmodul 0611
    Coding: 01042
    Shop #: WSC 63251
    No fault code found.

    Address 17 -------------------------------------------------------
    Controller: 8E0 920 950 M
    Component: KOMBI+WEGFAHRS. RB4 D42
    Coding: 01401
    Shop #: WSC 00262
    WAUZZZ8E54A237923 AUZ6Z0D0043239
    1 Fault Found:
    00668 - Supply Voltage Terminal 30
    53-10 - Supply Voltage Too Low - Intermittent

    Address 36 -------------------------------------------------------
    Controller: 8E0 959 760
    Component: Sitzmemory R2 F 0305
    Coding: 00002
    Shop #: WSC 63251
    No fault code found.

    Address 45 -------------------------------------------------------
    Controller: 8E0 951 177
    Component: Innenraumueberw. 0704
    Coding: 00001
    Shop #: WSC 00000
    No fault code found.

    Address 46 -------------------------------------------------------
    Controller: 8E0 959 433 BC
    Component: Komfortger√°t T3B 1412
    Coding: 08139
    Shop #: WSC 63251
    No fault code found.

    Address 55 -------------------------------------------------------
    Controller: 4Z7 907 357
    Component: dynamische LWR D09
    Coding: 00060
    Shop #: WSC 63251
    No fault code found.

    Address 56 -------------------------------------------------------
    Controller: 8E0 035 186 L
    Component: concert II GRO 0001
    Coding: 01203
    Shop #: WSC 63251
    No fault code found.

    Address 76 -------------------------------------------------------
    Controller: 8E0 919 283 A
    Component: Parkingsyst. A4 RDW D08
    Coding: 01114
    Shop #: WSC 63251
    No fault code found.

    End -------------------------------------------------------
    #5
  7. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 15, 2010]
    I have cleared the following fault -

    Address 17 -------------------------------------------------------
    Controller: 8E0 920 950 M
    Component: KOMBI+WEGFAHRS. RB4 D42
    Coding: 01401
    Shop #: WSC 00262
    WAUZZZ8E54A237923 AUZ6Z0D0043239
    1 Fault Found:
    00668 - Supply Voltage Terminal 30
    53-10 - Supply Voltage Too Low - Intermittent
    #6
  8. NHN
    Offline

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,320
    Likes Received:
    1,229
    [Jun 15, 2010]
    It would appear you havnt.
    #7
  9. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 15, 2010]
    Sorry I thought it was the full version.

    Lappy belongs to my neighbour, will see him later on
    #8
  10. NHN
    Offline

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,320
    Likes Received:
    1,229
    [Jun 15, 2010]
    The latest full version is 908.1 using a genuine interface, the shareware older versions are 409 & 311 is a very old version indeed which use a dumb interface as in non genuine.

    Why not upgrade to a genuine with latest software with a new release due imminently, PM if interested.
    #9
  11. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 15, 2010]
    I will see what the neighbour says and go halves on the cost. Will PM you.

    From the sounds of it the mirrors cannot be tilted?
    I always thought this is possible with electric and memory seats.

    I must be seeing things when I brought the car.
    #10
  12. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 19, 2010]
    Read the manual today -

    You can only tilt the passenger side wing mirror.

    To do this turn the mirror adjusting knob to left (Passenger side) and engage reverse gear. This will tilt the mirror down.

    When you put it back into drive or turn the knob to the centre, the mirror will return to the normal set position.
    #11
  13. NHN
    Offline

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,320
    Likes Received:
    1,229
    [Jun 19, 2010]
    Mirror will return to normal position, urrmm I suggest you test this before commenting that it will do mate, as not always correct.
    Last edited: Jun 19, 2010
    #12
  14. vinesh
    Offline

    vinesh Member

    Joined:
    Nov 6, 2005
    Messages:
    214
    Likes Received:
    0
    [Jun 19, 2010]
    Defo returns in the correct setting.

    I have my seat set to memory 1 and my brother has it on memory 2. When reverse is selected it fully tilts down then when driving off it returns to the saved position.

    I will try it for a couple of days and let you know if it returns to its position.
    #13

Share This Page