1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

where and what?? dump valve

Discussion in 'Diesel forum' started by Mcgough, Apr 4, 2005.

  1. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    need a dump valve as soon as possible where and which one should i get! for 1.9TDi 130 im getting the red samco hosing pipes made up but need the dump valve
     
  2. Advert Guest Advertisement


  3. MattS5

    MattS5 Active Member

    Joined:
    Jul 27, 2005
    Messages:
    609
    Likes Received:
    58
    [ QUOTE ]
    need a dump valve as soon as possible .....

    [/ QUOTE ]
    Why?
     
  4. Grant

    Grant Well-Known Member
    VCDS Map User Audi RS3

    Joined:
    Dec 4, 2003
    Messages:
    1,206
    Likes Received:
    117
    Do diesels have dump valves?
     
  5. MattS5

    MattS5 Active Member

    Joined:
    Jul 27, 2005
    Messages:
    609
    Likes Received:
    58
    That's why I asked... 'Why?'
    Does a dump valve have a practical purpose on a TDI or is it just to make a "swoooosh"?
     
  6. Grant

    Grant Well-Known Member
    VCDS Map User Audi RS3

    Joined:
    Dec 4, 2003
    Messages:
    1,206
    Likes Received:
    117
    Must be for the "ptsssh" sound! /ubbthreads/images/graemlins/crazy.gif

    [ur]http://www.thedervdoctor.co.uk/[/url]
     
  7. MattS5

    MattS5 Active Member

    Joined:
    Jul 27, 2005
    Messages:
    609
    Likes Received:
    58
    Isn't that the doors on the Enterprise??
     
  8. Grant

    Grant Well-Known Member
    VCDS Map User Audi RS3

    Joined:
    Dec 4, 2003
    Messages:
    1,206
    Likes Received:
    117
    [ QUOTE ]
    Must be for the "ptsssh" sound! /ubbthreads/images/graemlins/crazy.gif

    [ur]http://www.thedervdoctor.co.uk/[/url]

    [/ QUOTE ]
    That should be:

    http://www.thedervdoctor.co.uk/
     
  9. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    It has a practical use like on all turbo cars!! it actually makes that swoosh noise standard but the reason i need a dump valve is that ive got a Red samco hose kit and the turbo pipe is in 2 pieces ready for the dump valve in the middle!

    ive been told to get a bailey but im not sure whihc one THE DERV DOCTOR only sell full kits.

    ive also got the Longer intercooler for the front bumper to be fitted and id like to get all done at once!
     
  10. MattS5

    MattS5 Active Member

    Joined:
    Jul 27, 2005
    Messages:
    609
    Likes Received:
    58
    Have a word with TSR Performance... um... 01278 453036. I think they do Viper (?) dumpvalves.
     
  11. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    cheers mate
     
  12. RichA3Turbo

    RichA3Turbo ...Watching you!
    Staff Member Moderator

    Joined:
    Jan 6, 2003
    Messages:
    5,089
    Likes Received:
    4
    Diesels have absolutely NO use for a dump valve. The reason petrol cars have a DV is because when the throttle is closed the air hits a brick wall, builds up back pressure and stalls the turbo... The DV releases that pressure and keeps the turbo spinning. On a diesel, there is no physical throttle, therefore no brick wall. the air in a dieal ALWAYS has somewhere to go so it can really only be for the noise...If it had a use someone would have done it long before now.... They just sound daft on a diesel too.

    Rich
     
  13. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    Cheers i knew all that just wanted too know where to get one!

    take it your a petrol man!!

    I know all about the petrol turbo as above but not fully understanding the diesel turbo- cause im sure my car is fitted with a diverter valve as standard (am i wrong??)
     
  14. Guest

    Your car has no diverter valve as standard.
    If you fit a Dump valve because you have a pipe to fit it in where will you take the vacuum signal from? Diesel do not have a throttle body so no neg pressure in the inlet when off throttle pedal. Thats why Derv doc sells whole kits, it has many more parts than a valve.
    I have an experimental version on my car, no performance advantage whatsoever, purely for noise only.
     
  15. peteA3tdi

    peteA3tdi Member

    Joined:
    Mar 10, 2004
    Messages:
    408
    Likes Received:
    0
    i had one on a pug td sounded **** and covered the engine in oil
    you may find it puts the mil lamp on as well then going into limp
     
  16. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    i have the rest off the kit, solinoid, pedalswitch samco hosing etc just need the right valve- even if it is just for sound i want one now cause ive got the rest, and money is burning a hole
     
  17. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    and yea mate as i said before i no nowt about diesels ive owned 6 petrols and 2 petrol turbos
     
  18. [ QUOTE ]
    Cheers i knew all that just wanted too know where to get one!

    take it your a petrol man!!

    I know all about the petrol turbo as above but not fully understanding the diesel turbo- cause im sure my car is fitted with a diverter valve as standard (am i wrong??)

    [/ QUOTE ]

    are you getting that kind of noise?

    if so its the egr valve, for some reason on my 2.5 is very loud since i put my induction kit on.
     
  19. evomaster3000

    evomaster3000 Member

    Joined:
    Dec 8, 2004
    Messages:
    449
    Likes Received:
    5
    mate can you tell me what intercooler you got or what it came off and where you got it?
    Also whats the dimentions as i'm looking for one to do a FMIC on my A6 when i get a new bumper on it.

    Cheers
     
  20. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    hand made custom job, cheaper and better quality and perfect fit! ill put you in touch with the company give me a few dats too get there number so you can get a quote
     
  21. evomaster3000

    evomaster3000 Member

    Joined:
    Dec 8, 2004
    Messages:
    449
    Likes Received:
    5
    that wud be great mate, how much was yours?
     
  22. Advert Guest Advertisement



    to hide this advert.
  23. Mcgough

    Mcgough Member

    Joined:
    Oct 13, 2004
    Messages:
    847
    Likes Received:
    0
    cant say - reduced cost but yours will be cheap
     

Share This Page