1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What power....??

Discussion in 'A3/S3/Sportback (8P Chassis)' started by Johnson3, Sep 2, 2012.

  1. Johnson3

    Johnson3 Member

    Joined:
    Sep 2, 2012
    Messages:
    59
    Likes Received:
    2
    Just staring some research on theese engines ..

    I have a 2.0tfsi
    What sort of power can these engines take with standard internals ect ..

    Any help is great! :)
     
  2. Advert Guest Advertisement


  3. Sandra

    Sandra MODERATOR
    Staff Member Administrator Moderator TeamMisano TFSI Owners Group Gold Supporter quattro Audi S3 s tronic

    Joined:
    Sep 12, 2010
    Messages:
    23,513
    Likes Received:
    6,599
  4. Johnson3

    Johnson3 Member

    Joined:
    Sep 2, 2012
    Messages:
    59
    Likes Received:
    2
    Thanks :)
     
  5. S3Alex

    S3Alex Rarely neutral
    Team Ibis Audi S3

    Joined:
    Dec 3, 2008
    Messages:
    9,948
    Likes Received:
    3,972
    There's unfortunately a lot of differences between these and the S3 engine,so power increases are going to be limited with respect to the S3.

    There are things like the stock turbo and engine internals to contend with,and whilst I don't know the limits of the 2.0TFSi,the S3 has stronger rods,and also an uprated fuel system and of course the K04.
     
  6. akash_sky1

    akash_sky1 Active Member

    Joined:
    Nov 14, 2009
    Messages:
    1,191
    Likes Received:
    5
    The most the internals in the AXX 2.0TFSI in my old/your new car can take is around 350 LB FT torque before they need upgrading. The mapping has been done very well to minimize excessive & sudden load on the pistons when the turbo spools. So despite the huge and very rapid kick in the back you feel from 2-2500 RPM it is well within limits.
    If you stick a K04 turbo on there you will need to fit upgraded internals- con rods and pistons.
     
    Johnson3 likes this.
  7. audicruiser

    audicruiser Audi Heaven

    Joined:
    Feb 14, 2010
    Messages:
    1,865
    Likes Received:
    47
    Mine is mapped and running around 240bhp. It drives strong and has loads of torque. As standard the engine feels quite flat and non responsive, but once they are mapped they do come alive.
     
  8. Johnson3

    Johnson3 Member

    Joined:
    Sep 2, 2012
    Messages:
    59
    Likes Received:
    2


    What power is this then? U got any print outs ect ?
    Cam follower to be done tomorrow :)
     
  9. akash_sky1

    akash_sky1 Active Member

    Joined:
    Nov 14, 2009
    Messages:
    1,191
    Likes Received:
    5
    It dyno'd at 283 bhp and 320lb Ft torque, I have the dyno plot on here somewhere...
     
  10. Johnson3

    Johnson3 Member

    Joined:
    Sep 2, 2012
    Messages:
    59
    Likes Received:
    2
    :) kool thanks mate

    If u find it let me know ill have tha off u :)

    Hows ur new car going?
     

Share This Page