1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

what harness goes in too the A/C high pressure sensor?

auditj Oct 14, 2011

  1. auditj

    auditj New Member

    18
    0
    1
    Im looking for the connection or harness that goes in too the A/C high pressure sensor, im looking for the part number.

    I have the sensor on the condenser but i don't know what harness i have to connect to it.
    [​IMG]
     
  2. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    ETKA doesn't list anything obvious, what engine is it?

    How come the wiring isn't in place?
     
  3. auditj

    auditj New Member

    18
    0
    1
    It´s a 2002 3.0 the picture i think is from a 1.8, the problem here is that i did a face lift to the car(B7 S4 bumper) and i think the body shop must of ripped the harness or its probably there but i cant seem to find it.
     
  4. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    I'll have another look tomorrow night for a 3.0 specific loom. Remind me.

    The wiring loom diagrams are pretty complex as you can imagine!
     
  5. auditj

    auditj New Member

    18
    0
    1
    did you had a chance to check it out?
     
  6. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    I've just had a look. There's no wiring on the condensor diagrams, and all the wiring diagrams for the engine loom are split down, but none seem to relate to the pressure sensor on the condensor.

    Can anyone else help?
     
  7. auditj

    auditj New Member

    18
    0
    1
    is it a shared harness where those 3 cables come from?
     
  8. auditj

    auditj New Member

    18
    0
    1
    let me be more specific, is the harness that carries (ex. the right headlamp) the one that also carries the AC H/P connector?
     
    Last edited: Oct 19, 2011
  9. auditj

    auditj New Member

    18
    0
    1
    any news?
     
  10. auditj

    auditj New Member

    18
    0
    1
    i found the part number of the harness that carries the connector for the G65 high pressure sensor - (1j0 973 703) 3 pin female it goes to the 6X0 973 717 -14 pin female using this harness=== 8E0 971 073

    Thank you...
     
  11. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    Nice one, how did you find it out?
     
  12. auditj

    auditj New Member

    18
    0
    1
    i looked for the part number of the connector in another audi and traced in etka until i found the front frame harness. its # 4 in the picture

    [​IMG]
     
    Last edited: Oct 27, 2011

Share This Page