What Cruise stalk do I need.

dandav1985

Active Member
VCDS Map User
Joined
Dec 14, 2013
Messages
468
Reaction score
110
Points
43
Location
Newcastle upon Tyne
Hello I'm new to this forum, I have mainly joined this forum for my Lasses car which is a 2008 Audi A3 2.0Tdi 170 S-Tronic/DSG, We had this for 6 months and it only has 55000 on the clock.The thing i'm after is that I'm wanting to fit cruise control to the car, what cruise stalk do I need???I have a copy of ross tech Vag Com/VCDS This is what Vag com say's about the steering control Mod, I am aware it will accept cruise control.Address 16: Steering wheel Labels: 8P0-953-549-F.lbl Part No SW: 8P0 953 549 F HW: 8P0 953 549 F Component: J0527 H36 0070 Coding: 0011112 Shop #: WSC 06314 000 00000 VCID: 418F226D18BC7816DBD-8014 Subsystem 1 - Part No: XXXXXXXXXXX Component: E0221 H01 0030No fault code found.Cheers Dan
 
Last edited:
I have a couple of these in the shed, ill grab the part number for you in the morning, drop me a pm to remind me if you like
 
do a gumtree search, dont know where u stay, can get them supplied and fitted in glasgow for 149 mark
 
Thanks for the reply I'm really wanting to fit and code my self as I have a genuine copy of vag com anyway.Cheers Dan
 
Seriously mate, have you searched the forum?? Been covered hundreds of times.Part number for stalk only is 8P0 953 513 D or the kit will be slightly cheaper (which consists of an extra wire which you don't need), which the part number is 8P0 054 690.You will also need the lower cowling, 8P0 953 512 A 6PS. Total cost is approx £120 from your dealers. Have done plenty of these jobs, so if need an installer in London, let me know.
 
Hello, Thanks for the reply, so I take it any cruise stalk is compatible with my steering controller eg my controller is 8P0 953 549 F and Ive been offered a cruise stalk part no 8P0953513B I dont really want to start buying parts if it not going to work together.Cheers Dan
 
Yes, that part number will fit your car and match you stalk pattern design, unless it is a 58 plate facelift you have. In which case it will still work, but the stalk pattern will have a different diagram.Whatever you do, do not get the F stalk as this is for June 2009 models onwards.
 
  • Like
Reactions: dandav1985