1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Votex front bumper spoiler fitment

Discussion in 'A3/S3/Sportback (8P Chassis)' started by Leon tfsi, Jun 4, 2012.

  1. Leon tfsi
    Offline

    Leon tfsi Member

    Joined:
    Jul 9, 2011
    Messages:
    54
    Likes Received:
    0
    Ive seen a votex front splitter for sale on a 3 dr so I need to know if it will fit my sportback please? Also, how do they attach?
    #1
  2. Dannykn9
    Offline

    Dannykn9 "Cruise My Ride"

    Joined:
    May 14, 2011
    Messages:
    1,117
    Likes Received:
    53
    Hi mate, it should do, just make sure it is the one for the single grille front and not twin grille as I think they are slightly different.
    If you can get the part number then I can confirm this to you mate as I have all the part numbers from when I done my conversion.
    #2
  3. Leon tfsi
    Offline

    Leon tfsi Member

    Joined:
    Jul 9, 2011
    Messages:
    54
    Likes Received:
    0
    Ok cheers. I'll ask him to have a look. Where will the part number be? And can you see it if it's still attached to his car?
    #3
  4. MTRL
    Offline

    MTRL Split Grill!

    Joined:
    Nov 17, 2011
    Messages:
    463
    Likes Received:
    52
    Easy to fit.

    1) Unscrew all the screws underneath the front bumper.
    2) Clean all areas where glue is to be applied
    3) Apply glue to splitter around the sides, underneath and a bit on the front. I used black stickaflex
    4) Tape to body to hold it in place.
    5) Replace the screws with the longer screws provided & the plastic offset piece for the centre.
    6) Check its all in the correct position and the tape is nice and tight.
    7) Leave for 24 hours
    8) Post photo

    Keep some white spirits and a clean rag close to hand to wipe off any excess glue quickly.
    #4
  5. Leon tfsi
    Offline

    Leon tfsi Member

    Joined:
    Jul 9, 2011
    Messages:
    54
    Likes Received:
    0
    Cheers mate. Anyone know where he should look for the part number?
    #5
  6. Dannykn9
    Offline

    Dannykn9 "Cruise My Ride"

    Joined:
    May 14, 2011
    Messages:
    1,117
    Likes Received:
    53
    I think the part number should be underneath mate.
    Have you got a picture of the car it is already fit onto?
    #6

Share This Page