1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

vcds results, possible boost leak?

Discussion in 'A3/S3 Forum (8L Chassis)' started by 5l4y3r10, Jun 17, 2013.

  1. 5l4y3r10
    Offline

    5l4y3r10 Member

    Joined:
    Jul 31, 2012
    Messages:
    65
    Likes Received:
    0
    [Jun 17, 2013]
    so i now own vcds and love it, i just read on hear to check the adaptation mixture in block 32, and also hold the revs at 3000 rpm and the air flow should be 10.00g/s, so off i went and had a look at block 32. it let it run for 5 minuets as i think i accidently reset it, the idle one was showing 0.4% and the other on 0.0% and the same after 10 mins or so. i then tried to hold as best as i could at 3000rpm but the air flow only went to about 9.00 g/s maybe even just below that. my car is a 2003 aum 1.8t a3, 120k miles with no fault codes. how ever when on boost scince i have owned the car you can hear quite a loud ssssssssssssssssss, but like i say no noticeable loss in power however has allways been there and been checked by a couple of people for leaks but none found however never had a smoke test. just information on what to do next really as i want to start modding car but want a healthy engine first. thankyou..
    #1
  2. Ads

    Ads

    [Sep 22, 2014]

  3. 16Klappe
    Offline

    16Klappe Princess Clap.

    Joined:
    Sep 16, 2008
    Messages:
    5,327
    Likes Received:
    906
    [Jun 17, 2013]
    Smoke test.
    #2
  4. Scullies
    Online

    Scullies Well-Known Member

    Joined:
    Feb 9, 2012
    Messages:
    1,282
    Likes Received:
    318
    [Jun 17, 2013]
    +1 on smoke test

    make 100% sure there are no leaks before running logs to get an accurate reading. Then you can log your maf reading, 3rd gear pull, foot flat from 2000rpm to the danger zone :rolleyes:
    #3

Share This Page