1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VCDS-lite 2002 A3 "Not OBD II Compatible"

Discussion in 'VCDS (formerly VAG-COM) forum' started by Phil_H, Jul 1, 2011.

  1. Phil_H
    Offline

    Phil_H Member

    Joined:
    Jun 22, 2011
    Messages:
    39
    Likes Received:
    1
    Hi,

    Keep getting this error on my A3 Tdi?

    I've check the drivers are installed...and its also on the correct com port.

    When it scans it goes through everything the comes up "End Test" but with o results etc??

    Then when doing the compatibility test it comes up with the above error?

    Any ideas?

    I'm using an ebay cable with VCDS-lite (also tried it on the older version of Vag Com) with windows vista.

    Cheers
    Phil
    #1
  2. Phil_H
    Offline

    Phil_H Member

    Joined:
    Jun 22, 2011
    Messages:
    39
    Likes Received:
    1
    ok..well I've found a bit more info and the OBD II bit should not result in it not scanning?

    Any ideas why it won't scan?


    Drivers are ok...serial port is ok..lead into car. Ignition is on.


    ??
    #2
  3. NHN
    Offline

    NHN Modmetractor

    Joined:
    Jan 14, 2008
    Messages:
    27,261
    Likes Received:
    1,223
    Can you access a module directly instead of an auto scan
    #3
  4. Phil_H
    Offline

    Phil_H Member

    Joined:
    Jun 22, 2011
    Messages:
    39
    Likes Received:
    1
    No, Comes up with some error saying it cannot see the module or something?
    #4

Share This Page