1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VCDS coding xenon to audi a3 2004

Discussion in 'VCDS (formerly VAG-COM) forum' started by imy2k, Mar 13, 2013.

  1. imy2k
    Offline

    imy2k New Member

    Joined:
    Mar 8, 2013
    Messages:
    27
    Likes Received:
    0
    Hi all, I need to code in my single Xenons i bought from ebay to my audi a3 2004 they are all fitted and sorted and work just need to code them in and make the dash warning light go away. I understand i have to go into to 09, CE module, and check on byte 21. Firstly the bytes did not go that far thus i entered 00 untill it go to byte 21 and selected the option on xenons from the drop down menu and copied the long code and when i tried to enter this back on to it did not allow me too save the code. Are the options different on an 2004 A3? Thanks in advance
    #1
  2. NHN
    Offline

    NHN Modmetractor

    Joined:
    Jan 14, 2008
    Messages:
    27,237
    Likes Received:
    1,221
    Log of the car would help.
    #2
  3. imy2k
    Offline

    imy2k New Member

    Joined:
    Mar 8, 2013
    Messages:
    27
    Likes Received:
    0
    I will try get one up asap but does not help as i'm using my employers cable at there garage.
    #3
  4. Breezey
    Offline

    Breezey Member

    Joined:
    Mar 10, 2010
    Messages:
    438
    Likes Received:
    2
    Subscribed, i will be doing this shortly to my A3 which is also a 2004 but mine already has xenons so hoping the CE supports it!.
    #4
  5. imy2k
    Offline

    imy2k New Member

    Joined:
    Mar 8, 2013
    Messages:
    27
    Likes Received:
    0
    Turns out i don't have byte 21 , How can i tackle this ?
    #5
  6. NHN
    Offline

    NHN Modmetractor

    Joined:
    Jan 14, 2008
    Messages:
    27,237
    Likes Received:
    1,221
    As advised before, provide a log so we can see what modules are installed.
    #6
  7. Breezey
    Offline

    Breezey Member

    Joined:
    Mar 10, 2010
    Messages:
    438
    Likes Received:
    2
    Slight thread hijack but NHN could you please advise on mine mate for bi-xenon ? : part of the scan.





    Shop #: WSC 00000 000 00000
    VCID: 2F676218C78D


    No fault code found.


    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. Labels: 8P0-907-279-23-H.lbl
    Part No SW: 8P0 907 279 A HW: 8P0 907 279 A*
    Component: Bordnetz-SG 1.0 H30 0501
    Revision: 00030000 Serial number: 00000000403829
    Coding: 038A4F00A2141000000000000000000000
    Shop #: WSC 00000 000 00000
    VCID: 3B7F464803F5


    Part No: 8P2 955 119 A
    Component: Wischer WWS Audi350 0170
    Coding: 16711696
    Shop #: WSC 00000


    1 Fault Found:
    00924 - Relay for Headlamp Cleaning System (J39)
    009 - Open or Short to Ground


    -------------------------------------------------------------------------------
    Address 15: Airbags Labels: 8P0-959-655-84.lbl
    Part No SW: 8P0 959 655 D HW: 8P0 959 655 D
    Component: Airbag 8.4ED H00 0140
    Coding: 0011602
    #7

Share This Page