1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

vcds codes-remote central locking inop

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by wes68, Apr 19, 2014.

  1. wes68
    Offline

    wes68 New Member

    Joined:
    Aug 9, 2007
    Messages:
    4
    Likes Received:
    0
    [Apr 19, 2014]
    Hi all,hoping for some help on here. Last week my central locking went completely & interior lights staying on,some dash lights too on my a4 cab 2.4v6 02 plate. Did a search on here & drivers door connector was favourite,so I pulled the rubber back & found the thick red/grey wire broken completely & the brown wire on its last couple of strands. I repaired these wires,everything worked fine & I was rather chuffed. However a day later I came out from work & my battery was flat,got the car jump started & went home with no further probs. Now I have an intermittent problem with interior lights staying on again,the hazards turn themselves on whilst im driving(I have to switch them off twice,then theyre fine & stay off) & my remote central locking dosent work again.Is it possible that the broken wires have damaged my convenience module in any way? With vcds plugged in im getting01330-central module for central convenience(j393) 37-00 Faulty. 01134Alarm horn(h12) 29-00 short to ground 01366-opened due to crash signal 35-00 01366 opened due to crash signal 36-00-open circuit. Any advice offered is much appreciated
    #1
  2. Ads

    Ads

    [Sep 30, 2014]

  3. s3_trev
    Offline

    s3_trev 3 door or no door!

    Joined:
    Nov 29, 2013
    Messages:
    773
    Likes Received:
    164
    [Apr 19, 2014]
    The only advice I can give is to use paragraphs. This will dramatically improve the chances of someone else wanting to help you.
    #2

Share This Page