1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Valve springs changed gat same problem

Discussion in 'A3/S3/Sportback (8P Chassis)' started by l6rth, Sep 25, 2011.

  1. l6rth

    l6rth Member

    Joined:
    Mar 10, 2011
    Messages:
    85
    Likes Received:
    1
    Hi all,

    Some of you may know I have had my exaust valve springs changed,but to my disappointment the car still has the same problem,hesitation under hard acceleration,any ideas.warranty runs out tomorrow.seriously annoyed
     
  2. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat
    Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,991
    Likes Received:
    1,383
    It will still be covered as you have raised the issue within warranty, go back & say its still not fixed & if they argue warranty, which they probably wont, then state it was brought to them within, so they are obliged to rectify it.
     
  3. Kelza

    Kelza MODERATOR
    Staff Member Moderator VCDS Map User Audi RS3

    Joined:
    Oct 29, 2010
    Messages:
    2,910
    Likes Received:
    479
    coil packs,,plugs,,new diverter value, check hoses for splits , make sure your cai hose to turbo is on tight,,vagcom to check faults,,maf ,....
     
  4. l6rth

    l6rth Member

    Joined:
    Mar 10, 2011
    Messages:
    85
    Likes Received:
    1
    The car was suppose to be checked after the work was carried out,they obviously did drive it properly.I was so annoy this morning I even contemplated p exing it,I've only had it 6 months.they only thing I liked the look of was a tts.anyway I'm not doing that but surely they would have vagcomed it before returning it to me.coil packs and plugs won't be warranty so is there a better set to get if that is the problem?what about a map problem?
     
  5. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat
    Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,991
    Likes Received:
    1,383
    Is it mapped & if so who by.

    Exhaust valve spring issue may not even show an error, it may show a misfire fault on cylinder 3, but then again it may not as some havnt had but had the same fault & recall work done.

    Look dont worry about these issues atm, get back to dealer, then see what outcome is before jumping to conclusions.
     
  6. l6rth

    l6rth Member

    Joined:
    Mar 10, 2011
    Messages:
    85
    Likes Received:
    1
    The exaust valve springs in the head have been done,just annoyed it's been returned faulty so was wondering what it could be that isn't wWarranarty covered
    Thanks for the help
    No remap "yet"
     
  7. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat
    Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,991
    Likes Received:
    1,383
    Then you have to ask why did they do the springs for that fault if it isnt the cause, it was taken to them with that fault, how did they diagnose them being the issue is what mystifies me as if you notice the issue already then I bet they didnt road test it either at all or properly, its not fixed so go back, simples.
     
  8. l6rth

    l6rth Member

    Joined:
    Mar 10, 2011
    Messages:
    85
    Likes Received:
    1
    I already emailed just to make sure,they didn't recognise the fault at first then I reexpained,the thing with the valve springs is that it is a product inhancement not a warranty job If that makes a difference
     
  9. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat
    Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,991
    Likes Received:
    1,383
    Enhancement my assssse, audi dont recall things to enhance, they recall due to there feck ups, it is warranty because it causes issues like this on these cars, my mates S3 doesnt show a recall for these, but he has the exact same issue, so tomorrow gonna swap out his plugs as they have changed his coils foc already, under a recall aswell, nope sorry meant enhancement lmfao.
     
  10. l6rth

    l6rth Member

    Joined:
    Mar 10, 2011
    Messages:
    85
    Likes Received:
    1
    Let ,e know how you get on with the plug change,and what plugs you use
     
  11. gynads

    gynads Member

    Joined:
    Oct 10, 2009
    Messages:
    322
    Likes Received:
    2
    I had this issue, took it to REVO HQ, turned out it was a combination of the PCV leaking , so fitted a BSH blanking plug thing , but mainly was running too rich, i drove it home with the map leaned out and was way better.
     

Share This Page