1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

vagcom faults

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by N80KRR, Jan 11, 2012.

  1. N80KRR
    Offline

    N80KRR Member

    Joined:
    Feb 19, 2009
    Messages:
    180
    Likes Received:
    1
    [Jan 11, 2012]
    hi everybody, just wondered if anyone could help with these fault codes? as i dont have the money to buy the full version of vcds or clue what some mean.

    16891 - Idle Control System RPM: Higher than Expected.

    P0507 - 001 - Upper Limit Exceeded

    01331 - Door Control Module; Driver Side (J386)

    49-00 - No Communications

    01370 - Shareware Version. To Decode all DTCs

    35-00 - Please Register/Activate

    00962 - Shareware Version. To Decode all DTCs

    35-00 - Please Register/Activate

    01368 - Alarm triggered by Luggage Compartment Switch

    35-00 - -

    01374 - Shareware Version. To Decode all DTCs

    35-00 - Please Register/Activate

    01371 - Shareware Version. To Decode all DTCs

    35-00 - Please Register/Activate

    01561 - Left Rear Door

    59-10 - Can't Unlock - Intermittent

    01561 - Shareware Version. To Decode all DTCs

    61-10 - Please Register/Activate - Intermittent

    01562 - Shareware Version. To Decode all DTCs

    61-10 - Please Register/Activate - Intermittent

    00956 - Key 2

    35-10 - - - Intermittent

    thanks in advance.
    #1
  2. Ads

    Ads

    [Oct 21, 2014]

  3. Sandra
    Offline

    Sandra MODERATOR Staff Member Moderator

    Joined:
    Sep 12, 2010
    Messages:
    16,483
    Likes Received:
    2,486
    [Jan 11, 2012]
    Try user nhn he may be able to help you out.
    #2
  4. stu_m
    Offline

    stu_m Well-Known Member VCDS Map User

    Joined:
    Oct 25, 2009
    Messages:
    1,442
    Likes Received:
    36
    [Jan 11, 2012]
    Go to the Rosstech wiki you will find them all on these
    #3
  5. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep VCDS Map User

    Joined:
    Jul 8, 2008
    Messages:
    8,914
    Likes Received:
    527
    [Jan 11, 2012]
    only 1 id bother about is the top code others are nothing realy

    16891/P0507/001287 - Idle Control System RPM: Higher than Expected. [h=4]Possible Symptoms[/h]
    • Malfunction Indicator Lamp (MIL) active
    [h=4]Possible Causes[/h]
    • Throttle Valve Control Module (J338) dirty/faulty
    • Wiring/Connector(s) from/to Throttle Valve Control Module (J338)
    • Vacuum Leak
    [h=4]Possible Solutions[/h]
    • Check Throttle Valve Control Module (J338)
    • Check Wiring/Connector(s) from/to Throttle Valve Control Module (J338)
    • Check Intake System for Leaks
    [h=4]Special Notes[/h]
    • When found in the NAR 2.0T (BPY) check RVUTB: 01-09-03 or 2018919 for updated Crankcase Breather Valve
      • If the breather valve is faulty, full engine vacuum is typically found when removing the oil cap at idle.
    #4
    Sandra likes this.
  6. N80KRR
    Offline

    N80KRR Member

    Joined:
    Feb 19, 2009
    Messages:
    180
    Likes Received:
    1
    [Jan 12, 2012]
    Right got mate dropping his laptop off this evening which I'm going to use to try and clear some of these faults. I've got a new convenience module to code to my car as I think that's whats causing all the aggro with the door electrics not working on both sides of the car. only thing is i have no idea where to start, obviously I can read codes but don't want to mess it all up changing values I've found :: a4mods.com :: - The Premiere Audi A4 Modification Guide and Pictures Library which obviously helps with the numeric side of things but just wanted a bit of help using vcds. Gonna get father -in-law to look at engine fault hopefully he'll be able to play with the throttle valve module and get rid of the warning.
    #5
  7. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep VCDS Map User

    Joined:
    Jul 8, 2008
    Messages:
    8,914
    Likes Received:
    527
    [Jan 12, 2012]
    so your door locks windows aint working ?
    have you pulled the rubber back between drivers door
    very comon fault the wires snap and cause this problem
    you have to look close as there usaly still intact but broke tug them you will find the broke ones if any
    the TB fault iv found when iv had this on many cars needs TB RESET can be done with vcds if that dont work take it off clean it out then reset
    Throttle Body

    Prerequisites:
    • Ignition ON
    • Engine OFF
    • System voltage at least 11.0 V.
    [Select]
    [01 - Engine]
    [Basic Settings - 04]
    Group 060
    [Go!]
    Activate the Basic Setting.
    [ON/OFF/Next]
    Wait until Field 4 shows "ADP. O.K.".
    [Done, Go Back]
    [Close Controller, Go Back - 06]

    • Switch Ignition OFF.
    Last edited: Jan 12, 2012
    #6

Share This Page