1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

V6 Tdi Snub mount bolt!!!

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by S4_dan, Jun 16, 2014.

  1. S4_dan
    Offline

    S4_dan Fire up the Quattro!

    Joined:
    Jan 5, 2006
    Messages:
    1,731
    Likes Received:
    77
    [Jun 16, 2014]
    HELPPPPP!!!!

    How do you remove the top hex snub mount bolt? I got all of the others easily! I've tried jacking (with wood!) the engine slightly but the actual mount housing interferes with access to the 8mm allen bolt.

    ~Any easy tips/pointers please?

    Done a search but no joy. the 1.9tdi looks easy as p*ss!

    Cheers,

    Dan
    #1
  2. Ads

    Ads

    [Sep 18, 2014]

  3. AlexGSi2000
    Offline

    AlexGSi2000 Well-Known Member VCDS Map User

    Joined:
    Feb 14, 2012
    Messages:
    1,196
    Likes Received:
    118
    [Jun 16, 2014]
    I put the front end into "service mode" when I did mine - gave me more room to play around with.
    #2
  4. S4_dan
    Offline

    S4_dan Fire up the Quattro!

    Joined:
    Jan 5, 2006
    Messages:
    1,731
    Likes Received:
    77
    [Jun 16, 2014]
    Have done it!

    I ground off 3/4" of my 8mm allen key (I have a few!), stuck it in, 8mm spanner along with another 14mm spanner for leverage and off it came. All done and back together now. My old one wasn't bad to be fair. Only slight splitting at the bottom corner, but it was softer than the new one.

    So it can be done without putting into service mode if you have a spare allen key!! :)

    Dan
    #3

Share This Page