Using touch up paint.....

[RB S3]

Hi guys.
I would like to touch up a couple of chips i have on the car but don't want to make it worse.
I have ordered the correct paint from Cardiff Audi, and tested on some metal and all is good.
Any tips for applying or any advice??

 

[Crazypete00]

what i do is make sure the area is clean. apply small amounts and layer it if the chip is deep or dented. i then tend to use very fine wet sand and try to just sand the touch up paint until its near level. then use a cutting paste to blend it

 

[RB S3]

Ok mate thanks