1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Transmission protocol on audi a4 2002 1.9 TDI

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by jay786, Feb 22, 2012.

  1. jay786
    Offline

    jay786 Member

    Joined:
    Feb 10, 2012
    Messages:
    91
    Likes Received:
    0
    [Feb 22, 2012]
    What transmission protocol for the diagnostic cable is required for my car .. ISO9141 or KWP2000 or VPW or PWM or CAN-bus?

    Thank You
    #1
  2. Ads

    Ads

    [Dec 25, 2014]

  3. SL11CKK
    Offline

    SL11CKK Active Member

    Joined:
    Apr 22, 2011
    Messages:
    661
    Likes Received:
    31
    [Feb 23, 2012]
    K-Line, so in the lines of KWP....What are you trying to do as this usually is automatically selected by VCDS.

    Hope that helps, however wait for NHN as he should be able to confirm this.
    #2
  4. SL11CKK
    Offline

    SL11CKK Active Member

    Joined:
    Apr 22, 2011
    Messages:
    661
    Likes Received:
    31
    [Feb 23, 2012]
    K-Line, so in the lines of KWP....What are you trying to do as this usually is automatically selected by VCDS.

    Hope that helps, however wait for NHN as he should be able to confirm this.
    #3

Share This Page