1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Temp sensor

vwgtiking Feb 8, 2014

  1. vwgtiking

    vwgtiking Active Member

    1,029
    8
    38
    How the hell do I access it to remove it. So tight in there and no way to pull plastic clip off.

    Any tips would be great. Btw it's a 1.8t bfb.
     
  2. vwgtiking

    vwgtiking Active Member

    1,029
    8
    38
    My plastic must be the wrong way round are they only fitted one way?
     
  3. vwgtiking

    vwgtiking Active Member

    1,029
    8
    38
    Where is the n80 valve located ? A pic would be great.
     
    whiteek4 likes this.
  4. S4_dan

    S4_dan Fire up the Quattro! VCDS Map User

    2,713
    162
    63
    Normally a large - is flat head screwdriver should be enough to slide the plastic 'U' clip out. Don't think it matters if it's upside down or not.

    Not sure on the N80 valve location. Find your black purge canister and follow the hoses from it.

    Dan
     
  5. vwgtiking

    vwgtiking Active Member

    1,029
    8
    38
    I managed to get it off! And refit the clip the other way this time.
     

Share This Page