1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

TDI Exhausts

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by lionyo, Dec 5, 2010.

  1. lionyo
    Offline

    lionyo Member

    Joined:
    Dec 31, 2008
    Messages:
    123
    Likes Received:
    0
    [Dec 5, 2010]
    Hi,

    I want to fit a DTM rear bumper on my 2007 A4 TDI 2.0 and I was wondering does anyone know where I can buy a exhaust the same kind of style as the DTM exhausts to fit my A4 TDI?

    Many thanks
    #1
  2. Ads

    Ads

    [Sep 19, 2014]

  3. Marc1
    Offline

    Marc1 Member

    Joined:
    Feb 25, 2008
    Messages:
    726
    Likes Received:
    1
    [Dec 5, 2010]
    Milltek. OEM 2.0T exhaust (smaller tips than DTM though) yes it fits the 4cly TDI's, any custom exhaust place for c.£400 - DTM tips are 100mm IIRC. SO many options. :icon_thumright:
    #2
  4. lionyo
    Offline

    lionyo Member

    Joined:
    Dec 31, 2008
    Messages:
    123
    Likes Received:
    0
    [Dec 5, 2010]
    So just to confirm are you saying that the "Miltek 2.0T exhaust" will fit my 2.0 TDI?

    Where can I buy the exhausts from, a link to the exhaust that will fit my 2.0 TDI will be appreciated.

    Thanks in advance!
    Last edited: Dec 5, 2010
    #3
  5. Marc1
    Offline

    Marc1 Member

    Joined:
    Feb 25, 2008
    Messages:
    726
    Likes Received:
    1
    [Dec 7, 2010]
    No, Milltek is a brand. OEM = original manufacture equipment. No links sorry, it's all down to your budget. Do some research on the tinterweb.:readit: :thumbsup:
    #4
  6. lionyo
    Offline

    lionyo Member

    Joined:
    Dec 31, 2008
    Messages:
    123
    Likes Received:
    0
    [Dec 7, 2010]
    #5
  7. lionyo
    Offline

    lionyo Member

    Joined:
    Dec 31, 2008
    Messages:
    123
    Likes Received:
    0
    [Dec 7, 2010]
    Last edited: Dec 7, 2010
    #6
  8. Marc1
    Offline

    Marc1 Member

    Joined:
    Feb 25, 2008
    Messages:
    726
    Likes Received:
    1
    [Dec 7, 2010]
    The thing to remember is that the quattro exhaust for the 4 cylinder cars is different to the front wheel drive exhaust. So if you buy second hand (say 2.0T exhaust) then you need to make sure it's from a front wheel drive car if that's what yours is. Equally if you go with something like Milltek, they have details of the right exhaust for your car on their website. Also some of their dealers will be able to advise this over the phone, like Awesome GTI (also a forum sponsor, so they have a section on this forum that you can post a question for prices and part numbers in if prefered).

    Any second hand OEM exhausts need to be from a 4 cylinder car (either a B6 1.8T or B7 2.0T), anything from a V6 or V8 petrol or diesel will not fit. Again anything from another chassis such as the A5 (B8) will not fit.

    In terms of additional mods. You'd need the right hand hanger and heatshield as you've mentioned and also the lower rear valance. But you're covered with this if you already have a DTM rear bumper. If you haven't bought the bumper already then you could just get a 2.0T rear lower valance which will still match your existing S Line trim. IMO the DTM rear would need a DTM front or similiar to look right otherwise I thing the rear only would look odd and out of place as it's conciderably more aggressive looking.
    #7

Share This Page