1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Syncronising remotes A6 C5 help

wesmaster May 27, 2012

  1. wesmaster

    wesmaster Member

    Hi, on a friends A6 allroad, both remotes have stopped working, I have had this on my A6, I found an online instruction which involved pressing the lock or unlock buttons 1 time for remote 1 and 2 times for remote 2. I cant find these again. can any one help?
    Much appriciated.
  2. TYphoon GB

    TYphoon GB Active Member

    Found this .... Not sure this works on Immob' III vehicles...

    Programming new remote controls

    Two keys and all the remote controls that are to be programmed
    will be needed. The maximum number of remote controls that can be
    programmed, including old and new, is four.

    - Insert first key into ignition switch, and turn it to
    "ignition on."

    - Insert second key into outer door handle, and turn it to
    unlocked position for 10 seconds.

    System alarm will emit three beeps.

    - Take first remote control to be programmed and press button
    -1-, two beeps will be emitted. For second remote control, press
    button -1-, two beeps will be emitted. Use same procedure to program
    third or fourth remote control. All remote controls must be programmed
    within one minute, otherwise new programming will cancel and old
    remote control programming will be valid.

    - Turn key in outer door handle to unlocked position for 10
    seconds, one beep will be emitted.

    - Switch ignition off
  3. wesmaster

    wesmaster Member

    I'll try this tomorrow.

Share This Page