1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Swapping hubs/cv joints

Discussion in 'A4/S4 forum(B5 Chassis)' started by Alsie, Jan 28, 2012.

  1. Alsie

    Alsie Member

    Joined:
    Sep 9, 2011
    Messages:
    133
    Likes Received:
    2
    The cv joint and wheel bearing has gone on my 1998 1.8T sport estate, this replaced very recently my 1.9T diesel estate, the diesel had new cv joints and bearings less than three months ago and was wondering the entire hub and driveshaft assembly is compatable with the 1.8T sport

    Would certainly make it easier to swap the whole thing.
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. aragorn

    aragorn "Stick a V8 in it!"
    Staff Member Moderator VCDS Map User

    Joined:
    Jan 30, 2008
    Messages:
    16,657
    Likes Received:
    471
    It might.

    The upright is the same for sure.

    The outer CV is probably the same, the inner joint however might not be. Some TDI's got 108mm inners and some got 130mm. All 1.8T's got 108mm.

    If the inner is different you might be able to swap the TDI outer CV onto your 1.8T shaft, i'm not sure if the shaft itself is the same size though or if the TDI ones are larger.
     
  4. Alsie

    Alsie Member

    Joined:
    Sep 9, 2011
    Messages:
    133
    Likes Received:
    2
    Cheers will give it a go
     

Share This Page