1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Suspension Springs

Simon Stark Aug 18, 2014

  1. Simon Stark

    Simon Stark New Member

    20
    4
    1
    Hi guys,
    I have a set of eibach springs to go on my s3. Front is 25ml and rear is 20ml. Could I swap these around or are they specific to front and back?
     
  2. 16Klappe

    16Klappe I <3 Panda's! Supporter

    5,795
    1,183
    113
    No you couldn't :keule:

    Why would you want the back lower than the front?
     
  3. Simon Stark

    Simon Stark New Member

    20
    4
    1
    For clearance, over bumps and high drives. I haven't lowered a car in 8 years. It was a question and no need to berate me mate.
     
  4. 16Klappe

    16Klappe I <3 Panda's! Supporter

    5,795
    1,183
    113
    If you need clearance over bumps and go on high drive ways then remove the lowering springs, but even if you could swap them round (which you can't) then it would ruin the handling of the car.

    Good use of the word berate, I like a nicely placed verb.
     
  5. The Doctor

    The Doctor Well-Known Member

    1,396
    189
    63
    The springs are also completely different overall lengths on front & back and sit differently on the shocks/lower plate.
     
  6. jojo

    jojo Looking for Boost! Staff Member Moderator Team Daytona quattro Audi S3 Audi A6 Audi Avant Owner Group

    28,769
    3,436
    113
    You will be fine mate, when i ran Eibachs, I never had clearance issues going over speed bumps, they are really not THAT low.:teapot:
     

Share This Page