1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Subframe section removal

Discussion in 'A3/S3/Sportback (8P Chassis)' started by wuta3, Nov 24, 2013.

  1. wuta3
    Offline

    wuta3 Well-Known Member

    Joined:
    Jul 1, 2012
    Messages:
    1,108
    Likes Received:
    342
    [Nov 24, 2013]
    Hi guys,

    Quick question. The large subframe plate at the front that the lower engine / dogbone mount is on, if you undo the 6 bolts either side of that does it just drop off? I lost a ******* nut from the turbo-end of the downpipe in there somewhere ... at least the exhaust is in :)

    Thanks
    Last edited: Nov 24, 2013
    #1
  2. Ads

    Ads

    [Nov 23, 2014]

  3. S3_Jacko
    Offline

    S3_Jacko Well-Known Member

    Joined:
    Jul 16, 2010
    Messages:
    1,433
    Likes Received:
    383
    [Nov 24, 2013]
    Look up anti-roll bar fitment threads... i'm sure you need to drop that front subframe to fit that...might be worth a look
    #2
  4. wuta3
    Offline

    wuta3 Well-Known Member

    Joined:
    Jul 1, 2012
    Messages:
    1,108
    Likes Received:
    342
    [Nov 24, 2013]
    Cheers, found out you can remove it. For anyone else/search purposes, bring the dogbone with it.
    #3

Share This Page