1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Stage 1 remap

Discussion in 'A3/S3 Forum (8L Chassis)' started by Shaun-84, May 18, 2013.

  1. Shaun-84

    Shaun-84 Member
    Team Daytona Silver Supporter quattro Audi A5 Black Edition TDi

    Joined:
    Feb 24, 2013
    Messages:
    71
    Likes Received:
    29
    Afternoon all


    Not long had my S3 but have had new clutch done and Cambbelt is being done in the next few weeks. Car is standard other than a K+N panel filter, was wondering if I need to upgrade anything else etc for a stage 1 map?!?


    Also which n where are the best places to get this map done?! Not sure wether to get a map which you can take off if needed either, all ideas/opinions welcomed


    Cheers
     
  2. Advert Guest Advertisement


  3. Gops

    Gops Badger 5 Edition
    VCDS Map User Gold Supporter Audi S3

    Joined:
    Nov 6, 2009
    Messages:
    3,118
    Likes Received:
    594
    Badger 5 TIP would be nice! And a catch can/ PCV delete. Also make sure there's no boost leaks! And get a good stage1 map from a reputable tuner!
     
  4. voorhees

    voorhees Moderator
    Staff Member Moderator Black Edition Team Brill Red

    Joined:
    Dec 18, 2005
    Messages:
    16,075
    Likes Received:
    1,893
    Where are you Shaun ?
    Change your Diverter Valve to a Forge one.
     
  5. Shaun-84

    Shaun-84 Member
    Team Daytona Silver Supporter quattro Audi A5 Black Edition TDi

    Joined:
    Feb 24, 2013
    Messages:
    71
    Likes Received:
    29
    I'm in Guildford Surrey, are catch can and PVC delete easy to do?

    when you reputable tuner are there many around?

    cheers
     
  6. Tim_Attard

    Tim_Attard Active Member

    Joined:
    Nov 12, 2012
    Messages:
    474
    Likes Received:
    44
    for a map its really got to be r tech or badger what ever is closest, id say give it a good service plugs, oil etc, check for leaks, pcv and n249 are easily done (look in stickies), a new tip badger 5 as said or a oversized sfs standard dv should be ok but if you do want to up grade go for a forge again look in stickies
     
  7. jojo

    jojo Looking for Boost!
    Staff Member Moderator Team Daytona quattro Audi S3 Audi A6 Audi Avant Owner Group

    Joined:
    Sep 4, 2003
    Messages:
    28,588
    Likes Received:
    3,310
    Keeping the standard DV is the 'in' thing these days Jase.
     
  8. voorhees

    voorhees Moderator
    Staff Member Moderator Black Edition Team Brill Red

    Joined:
    Dec 18, 2005
    Messages:
    16,075
    Likes Received:
    1,893
    So the standard spring will keep up with the remap Joe ?
     
  9. Tim_Attard

    Tim_Attard Active Member

    Joined:
    Nov 12, 2012
    Messages:
    474
    Likes Received:
    44
    yeah should do fine, if im correct in thinking that the forge ones are not that amazing unless you get a new one as they have been revised? could be majorly wrong
     
  10. jojo

    jojo Looking for Boost!
    Staff Member Moderator Team Daytona quattro Audi S3 Audi A6 Audi Avant Owner Group

    Joined:
    Sep 4, 2003
    Messages:
    28,588
    Likes Received:
    3,310
    The standard plastic DV has been tested by Bill badger at over 30psi with no leaks!
     
  11. voorhees

    voorhees Moderator
    Staff Member Moderator Black Edition Team Brill Red

    Joined:
    Dec 18, 2005
    Messages:
    16,075
    Likes Received:
    1,893
    Shaun when your at least ten year old standard DV goes pop just get Joe and Tim to sort it :haha:
    For the sake of a £100 I would change it.
     
  12. jojo

    jojo Looking for Boost!
    Staff Member Moderator Team Daytona quattro Audi S3 Audi A6 Audi Avant Owner Group

    Joined:
    Sep 4, 2003
    Messages:
    28,588
    Likes Received:
    3,310
    Aye Jase, Bill also tested a whole load of aftermarket DVs, and most of them leaked! There's vids on fb.
     

Share This Page