1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Spacers

Discussion in 'DPM Performance' started by Scott, Aug 28, 2009.

  1. Scott
    Offline

    Scott Well-Known Member

    Joined:
    Mar 10, 2009
    Messages:
    1,274
    Likes Received:
    114
    [Aug 28, 2009]
    Hi,
    I have an 09 2.0 TDI with black edition wheels. The car is lowered and it is particularly low on the front. How much further out do you think I can go with spacers? I may lower the back a little more too.

    [​IMG]

    [​IMG]

    [​IMG]

    Thanks
    Scott
    #1
  2. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,493
    Likes Received:
    80
    [Aug 28, 2009]
    Morning,

    It's difficult to tell with the front wheels on a turn but depending on your ET I'd say 10mm front and 12mm rear.

    Damian @ DPM Performance
    #2
  3. Scott
    Offline

    Scott Well-Known Member

    Joined:
    Mar 10, 2009
    Messages:
    1,274
    Likes Received:
    114
    [Aug 28, 2009]
    Hi Damian

    Thank you, much appreciated. I will get some pics of the front wheels straight just to confirm. If it's all good, I'll order from you guys.

    I'm assuming I'll be ok fitting these myself? or is that a stupid question? :)

    Thanks
    Scott
    #3
  4. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,493
    Likes Received:
    80
    [Aug 28, 2009]
    Yeah, it's just like changing a wheel.

    Thanks,

    Damian @ DPM Performance
    #4
  5. Scott
    Offline

    Scott Well-Known Member

    Joined:
    Mar 10, 2009
    Messages:
    1,274
    Likes Received:
    114
    [Aug 28, 2009]
    Many thanks. I'll get some more pics today or tomorrow to confirm 10mm at the front will be OK
    Will I need longer locking wheel nuts?
    Last edited: Aug 28, 2009
    #5
  6. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,493
    Likes Received:
    80
    [Aug 28, 2009]
    Yeah they're available direct from McGard, you'll need 14x1.5x37mm for 10mm spacers.

    Damian @ DPM Performance
    #6

Share This Page