1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Single wire operation

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by ricostuart, Sep 13, 2013.

  1. ricostuart
    Offline

    ricostuart Active Member

    Joined:
    Feb 3, 2013
    Messages:
    369
    Likes Received:
    32
    [Sep 13, 2013]
    Hi all,

    I keep getting an error via vagcom of intermittant single wire operation. Its from the drivers door card. I also notice every once in a while (very rarely) the drivers speaker stops working briefly. I traced that there is a wire to the door (in the jam) that is causing the issue.

    So I pulled off the door card (actually really hard to do the first time! So many plastic things break but goes back on cleanly now) and tried accessing the wiring. Its all taped securly and internally glued to the rubber conduit. Anyone know how to access these wires without damaging the conduit?

    Thanks!
    #1
  2. Ads

    Ads

    [Sep 18, 2014]

Share This Page