Jays Audi Turbo
Mar 30, 2010
How do i remove the scuttle panel one of the jets have stoped working.
remove the rubber strip along the front edge of the scuttle,
remove two wiper arms,
the scuttle panel should then pull off, it is clipped into a groove along the bottom edge of the windscreen.
take it easy pulling it off as the jets will have hoses and electrical connectors attached.
take it you have tried just rodding the jets out with a needle first?
Yeah i've done all that, i've managed to get the jet out now and i've gave it a good clean and blasted some compressed air thru and it works fine now
Separate names with a comma.