1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scanned my s3 too find these codes. Please anyone able to help?!

Discussion in 'A3/S3 Forum (8L Chassis)' started by Beany113, Oct 21, 2013.

  1. Beany113
    Offline

    Beany113 Member

    Joined:
    Aug 21, 2013
    Messages:
    50
    Likes Received:
    0
    [Oct 21, 2013]
    17743 - engine torque monitor 2 control limit exceeded p1335 intermittent

    16622 - manifold pressure/boost sensor (g31) signal too high p0238 intermittent

    16490 - manifold/air pressure =>- g71/ - f95 not a plausible signal p0106 intermittent

    17695 - control valve boost pressure - n249 open circuit p1287 intermittent

    16535 - fuel trim bank 1 (mult) system too rich p1127 intermittent

    18010 - power supply terminal 30 voltage too low p1602 intermittent

    that's what's come back on the scan. Can anyone please help me out?!! Thankyou guys!!
    #1
  2. Ads

    Ads

    [Sep 20, 2014]

  3. <tuffty/>
    Offline

    <tuffty/> Badger 5 Edition Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    15,922
    Likes Received:
    1,336
    [Oct 21, 2013]
    #2
  4. Beany113
    Offline

    Beany113 Member

    Joined:
    Aug 21, 2013
    Messages:
    50
    Likes Received:
    0
    [Oct 21, 2013]
    Have just bought a new Bosch MAF so will fit that clear the faults and re scan
    #3
  5. Beany113
    Offline

    Beany113 Member

    Joined:
    Aug 21, 2013
    Messages:
    50
    Likes Received:
    0
    [Oct 21, 2013]
    Replaced MAF and it's cleared all the codes accept one.

    17695- control valve boost pressure- n249 open circuit p1287 intermittent

    any ideas?
    #4
  6. <tuffty/>
    Offline

    <tuffty/> Badger 5 Edition Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    15,922
    Likes Received:
    1,336
    [Oct 21, 2013]
    N249 valve is unplugged... top of the cam cover... you need this for fuel trims to work

    <tuffty/>
    #5
  7. Beany113
    Offline

    Beany113 Member

    Joined:
    Aug 21, 2013
    Messages:
    50
    Likes Received:
    0
    [Oct 21, 2013]
    Mines been deleted and I've got the valve plugged in on a bubbler bung on top of the can cover pal :/
    #6

Share This Page