1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sachs Clutch Kit

S3Steve Mar 1, 2009

  1. S3Steve

    S3Steve Active Member

    1,621
    20
    38
    Can you give me a quote for one of your Sachs clutch kits for the 8L S3 please? Can you give me a complete price breakdown for all the parts including the flywheel, not sure if i'll need the flywheel yet. Can you also tell me what torque they are rated to?

    Thanks Steve
     
  2. ben@amdessex

    ben@amdessex Member

    290
    20
    18
    Morning Steve,

    The plate and cover is £440+ vat
    The Flywheel is £256 + vat
    Release Bearing is £35 + vat
    Fitting at the special offer price of £100 + vat

    The clutch is rated to 400llfbt.

    Ben
     
  3. S3Steve

    S3Steve Active Member

    1,621
    20
    38
    Thanks Ben,

    £100+vat for fitting an S3 clutch is a very good price! Do you keep it all in stock, or how long does it usually take to get in?

    Steve
     
  4. god_thats_quick

    god_thats_quick Numptie of the highest order

    2,507
    1
    36
    Is the flywheel dual mass and also second the comments about the parts being in stock?
     
  5. ben@amdessex

    ben@amdessex Member

    290
    20
    18
    sorry Steve. Suffering from fat fingers that day! Should have hit the "2" its actually £200 plus vat for the S3.

    We normally have them instock and if we don't we can get them within a day or two.
     
  6. god_thats_quick

    god_thats_quick Numptie of the highest order

    2,507
    1
    36
    I'm probably missing something, but is it a dual mass flywheel or what?

    I'll most likely try and give you a call on Monday if I get time.
     
  7. ben@amdessex

    ben@amdessex Member

    290
    20
    18
    That is with a Dual Mass Flywheel.
     
  8. jamal

    jamal New Member

    11
    0
    1
    Do you have an option that converts the flywheel to a single mass with this clutch?

    Could be interested, its for an 03 Audi TT 225 quattro.

    Thanks
     
  9. ben@amdessex

    ben@amdessex Member

    290
    20
    18
    We can do that it adds about £200 to the cost but we don't recommend it for road cars. Its abit harsh and juddery.

    Ben
     
  10. smudge_don

    smudge_don Active Member

    2,944
    11
    38
    Can i get a breakdown of cost for a kit for a 2004 (8P) 2.0 TDI please Ben
     
  11. ben@amdessex

    ben@amdessex Member

    290
    20
    18
    you will be looking at £490 for the plate and cover

    £252 for the flywheel and £45 for the bearing
     

Share This Page